Skip to main content

Fix Your Stuff

Right to Repair


Editing Step 6 —

Step Type:

Drag to rearrange

Similarly, the lower bezel can be easily pried up from body of the Streak.

The capacitive control circuitry is securely attached to the inner face of the lower bezel, so it's highly advised to pry up the bezel from below (as pictured), to make sure the circuit does not receive any damage.

Since the connector is inside the device, it's a good idea to leave the bezel attached for now.

After a bit of digging, the five T5 Torx screws securing the rear case can be removed.

Your contributions are licensed under the open source Creative Commons license.