Tools Featured in this Teardown

Introduction

The Timex TX5020 is an electronic thermometer that can be used both indoors and outdoors. It requires only a screwdriver to take apart.

This teardown is not a repair guide. To repair your Timex TX5020 LCD Electronic Thermometer, use our service manual.

Image 1/2: Image 2/2:
  • Here is the fully assembled thermometer.

Add Comment

Image 1/1:
  • Slide the battery compartment cover off by applying downward and forward pressure.

Add Comment

Image 1/2: Image 2/2:
  • Loosen and remove the four screws from the back of the thermometer.

Add Comment

Image 1/1:
  • Lift the back panel away from the rest of the case.

Add Comment

Image 1/2: Image 2/2:
  • Remove the three screws holding the circuit board in place.

Add Comment

Image 1/2: Be careful not to pull too hard as the board is attached to the battery contacts. Image 2/2: Be careful not to pull too hard as the board is attached to the battery contacts.
  • Lift the circuit board away from the case.

  • Be careful not to pull too hard as the board is attached to the battery contacts.

Add Comment

Image 1/2: Remove the push buttons from their compartment. Image 2/2: Remove the push buttons from their compartment.
  • Remove the screen from it's compartment.

  • Remove the push buttons from their compartment.

Add Comment

Image 1/1:
  • Here's a full view of the disassembled components (circuit board, screen, push buttons, and case).

Add Comment

Chris L

Member since: 12/17/2014

499 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 3

Past 30 Days: 25

All Time: 877