Fix Your Stuff Community Store

Sega Genesis II Teardown

Written By: Thor Odinson (and 4 other contributors)
Published: June 4, 2015
  • Comments: 1
  • Favorites: 16
  • Views: 10.9k

Sega Genesis II Teardown

Written By: Thor Odinson (and 4 other contributors)
Published: June 4, 2015
  • Comments: 1
  • Favorites: 16
  • Views: 10.9k

Teardown

Introduction

This is a Sega Genesis model 2. In this tear down you will be able to see what the inside of the Sega Genesis should look like.

What you need

This teardown is not a repair guide. To repair your Sega Genesis II, use our service manual.

  1. Sega Genesis II Teardown, Sega Genesis II Teardown: step 1, image 1 of 1

    • Flip the system over

    Edit

  2. Sega Genesis II Teardown, Removing the Screws: step 2, image 1 of 2 Sega Genesis II Teardown, Removing the Screws: step 2, image 2 of 2

    • Remove the four outer screws (you may want a small cup to keep your screws in.)

    Edit

  3. Sega Genesis II Teardown: step 3, image 1 of 1

    • Take plastic top off.

    Edit

  4. Sega Genesis II Teardown, Removing the Screws: step 4, image 1 of 1

    • Remove the nine inner screws.

    Edit

  6. Sega Genesis II Teardown: step 5, image 1 of 1

    • Remove metal piece.

    Edit

  7. Sega Genesis II Teardown: step 6, image 1 of 1

    • You now have access to your circuit board. (If you wish to remove the circuit board, continue.)

    Edit

  8. Sega Genesis II Teardown: step 7, image 1 of 1

    • Remove the two screws highlighted in picture to remove the circuit board.

    Edit

  9. Sega Genesis II Teardown: step 8, image 1 of 1

    • Lift the black piece of plactic up.

    Edit

  10. Sega Genesis II Teardown: step 9, image 1 of 1

    • Lift up the metal piece.

    Edit

  11. Sega Genesis II Teardown: step 10, image 1 of 1

    • You now have access to the inside of the bottom plastic piece.

    Edit

  12. Sega Genesis II Teardown, Circuit Board: step 11, image 1 of 3 Sega Genesis II Teardown, Circuit Board: step 11, image 2 of 3 Sega Genesis II Teardown, Circuit Board: step 11, image 3 of 3

    • This is the circuit board.

    Edit

  13. Sega Genesis II Teardown, Reassemble: step 12, image 1 of 1

    • Do the steps backwards to reassemble.

    Edit

Author

with 4 other contributors

Thor Odinson

Member since: 06/04/15

152 Reputation

1 Guide authored

Badges: 0

One Comment

Good job. Thanks

luca - Reply

Add Comment

View Statistics:

Past 24 Hours: 4

Past 7 Days: 26

Past 30 Days: 138

All Time: 10,942