Fix Your Stuff Community Store

Ryobi heat gun Teardown

Written By: Miles Park (and one other contributor)
Published: August 6, 2018
  • Comments: 1
  • Favorites: 0
  • Views: 1.5k

Ryobi heat gun Teardown

Written By: Miles Park (and one other contributor)
Published: August 6, 2018
  • Comments: 1
  • Favorites: 0
  • Views: 1.5k

Teardown

What you need

This teardown is not a repair guide. To repair your Ryobi heat gun EHG2000, use our service manual.

  1. Ryobi heat gun Teardown, Removing cowling: step 1, image 1 of 2 Ryobi heat gun Teardown, Removing cowling: step 1, image 2 of 2

    • Remove black plastic nose cowling by twisting anti-clockwise

    Edit

  2. Ryobi heat gun Teardown, Remove screws and clip: step 2, image 1 of 2 Ryobi heat gun Teardown, Remove screws and clip: step 2, image 2 of 2

    • Remove Philips head screws - 7 places

    • Remove wire clip

    Edit

  4. Ryobi heat gun Teardown, Split adhesive label: step 3, image 1 of 1

    • With a sharp blade cut the adhesive label inline with the split line of where the outer housings meet.

    Edit

  5. Ryobi heat gun Teardown, Opening up: step 4, image 1 of 1

    • Remove top half housings leaving subassemblies and parts on lower housing

    Edit

  6. Ryobi heat gun Teardown, Identifying parts: step 5, image 1 of 1

    • Internal parts

    • Motor

    • Heater element - stainless steel

    • PCB (Printed circuit board)

    • LED and Lens - Acrylic injection moulding

    • Switch assembly - ABS injection moulding

    • Housing - PC-ABC Injection moulding

    Edit

Author

with 1 other contributor

Miles Park

Member since: 03/31/17

121 Reputation

1 Guide authored

Badges: 0

One Comment

Why the elements was not hot

Resilau Lino - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 1

Past 30 Days: 9

All Time: 1,574