Skip to main content

Nostalgia Electrics PCM805 Wiring Teardown

Prerequisite Only
This guide is only intended to be used as a prerequisite for other guides. It's incomplete by itself.

What you need

  1. Nostalgia Electrics PCM805 Wiring Teardown, Unscrewing the base: step 1, image 1 of 2 Nostalgia Electrics PCM805 Wiring Teardown, Unscrewing the base: step 1, image 2 of 2
    • Unplug the device before following this guide.

    • First, place the device on its side, making sure the switch is not facing down.

    • Remove the eight 12mm Phillips #02 screws from the base.

  2. Nostalgia Electrics PCM805 Wiring Teardown: step 2, image 1 of 1
    • Gently separate the panel from the device.

    • Be sure not to tug at the wires that are still connected.

  3. Nostalgia Electrics PCM805 Wiring Teardown, Nostalgia Electrics PCM805 Wiring Teardown: step 3, image 1 of 2 Nostalgia Electrics PCM805 Wiring Teardown, Nostalgia Electrics PCM805 Wiring Teardown: step 3, image 2 of 2
    • Locate the tie strap holding the wires and cut with a pair of scissors.

    • Use care not to snip the wires.

  4. Nostalgia Electrics PCM805 Wiring Teardown: step 4, image 1 of 3 Nostalgia Electrics PCM805 Wiring Teardown: step 4, image 2 of 3 Nostalgia Electrics PCM805 Wiring Teardown: step 4, image 3 of 3
    • Make note of the wiring arrangement of each bundle before this step.

    • Using wire cutters, cut each wire as close to the wire connector as possible.

    • Cut the wires in both bundles.

    • To reassemble the cotton candy maker after cutting the wires, follow our rewiring guide.

Conclusion

To reassemble your device, follow these instructions in reverse order.

Joshua Harriger

Member since: 01/13/15

309 Reputation

2 Guides authored

Team

USF Tampa, Team 3-5, Hickman Winter 2015 Member of USF Tampa, Team 3-5, Hickman Winter 2015

USFT-HICKMAN-W15S3G5

5 Members

8 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 95