Skip to main content

What you need

This teardown is not a repair guide. To repair your Morphy Richards Iron, use our service manual.

  1. Morphy Richards Iron Teardown, Morphy Richards Iron Teardown: step 1, image 1 of 1
    • This is the iron we will take apart.

  2. Morphy Richards Iron Teardown: step 2, image 1 of 1
    • First remove the rear or the iron using the flathead screwdriver.

  3. Morphy Richards Iron Teardown: step 3, image 1 of 1
    • Next remove the cable bridge bracket.

  4. Morphy Richards Iron Teardown: step 4, image 1 of 1
    • Next remove the screws from the base. (see arrows for location)

  5. Morphy Richards Iron Teardown: step 5, image 1 of 1
    • Next remove the screw the hold the top on.

  6. Morphy Richards Iron Teardown: step 6, image 1 of 1
    • To free the long cable remove from terminal block at rear.

  7. Morphy Richards Iron Teardown: step 7, image 1 of 1
    • At the front of the iron pull out the buttons for the steam and water.

  8. Morphy Richards Iron Teardown: step 8, image 1 of 1
    • Next unclip the button holder (red circle) by undoing the screws (black circle)

  9. Morphy Richards Iron Teardown: step 9, image 1 of 1
    • Next remove the bridge clip from the arrows position.

  10. Morphy Richards Iron Teardown: step 10, image 1 of 1
    • Next remove the inner button (black circle)

    • Now remove the centre screw (red arrow)

  11. Morphy Richards Iron Teardown: step 11, image 1 of 1
    • slide off the cable holder from the cable.

  12. Morphy Richards Iron Teardown: step 12, image 1 of 1
    • Disassemble the plug

    • First remove the casing.

    • Now remove the wires from the pins.

    • Next remove the pins.

  13. Morphy Richards Iron Teardown: step 13, image 1 of 1
    • Remove front of the iron by undoing the screw (arrow) by first taking off cover cap.

  14. Morphy Richards Iron Teardown: step 14, image 1 of 1
    • Next take out round selector, this is simply clipped so can be pulled out with pliers.

  15. Morphy Richards Iron Teardown: step 15, image 1 of 1
    • Next remove the washer parts at the front of the iron.

    • Take the tubing off.

  16. Morphy Richards Iron Teardown: step 16, image 1 of 1
    • Remove the seals for the water pump.

    • Now take pumps out.

  17. Morphy Richards Iron Teardown: step 17, image 1 of 1
    • Remove the screw (circled) this will lead to the separation of the base and the top.

  18. Morphy Richards Iron Teardown: step 18, image 1 of 1
    • Remove the top of the iron to reveal the under parts.

    • Now remove the rubber seals from the plate.

    • Take out the screws linking to the stainless steel base.

  19. Morphy Richards Iron Teardown: step 19, image 1 of 1
    • Remove the terminal block from the wires.

    • Next take off the black section of the iron.

  20. Morphy Richards Iron Teardown: step 20, image 1 of 1
    • Now remove the screws from the steel base.

  21. Morphy Richards Iron Teardown: step 21, image 1 of 1
    • Next remove each individual part ( mostly wiring)

  22. Morphy Richards Iron Teardown: step 22, image 1 of 1
    • All parts at the end of the process.

RIchard fox

Member since: 03/17/10

269 Reputation

1 Guide authored

View Statistics:

Past 24 Hours: 5

Past 7 Days: 42

Past 30 Days: 129

All Time: 32,547