Skip to main content

What you need

This teardown is not a repair guide. To repair your Moodo Smart Aroma Diffuser, use our service manual.

  1. Moodo Smart Aroma Diffuser  Teardown, Device: step 1, image 1 of 2 Moodo Smart Aroma Diffuser  Teardown, Device: step 1, image 2 of 2
    • The device can be opened by removing the 4 Philips screws visible from the bottom

  2. Moodo Smart Aroma Diffuser  Teardown, Fan assembly: step 2, image 1 of 1
    • The fan and air guidance assembly is attached to the main PCB with 2 screws.

    • Each fan has one connector for power and one for the pod sensor - these need to be disconnected from the PCB before removing the fan assembly. If you want to replace a fan, you will need to unhook the sensor cables from the sides.

    • Fans used are: 1604KL-01W-B39-B00 NMB Technologies DC Fans DC Axial Fan, 40x10mm, 5VDC, 4.2CFM

  3. Moodo Smart Aroma Diffuser  Teardown, PCB: step 3, image 1 of 2 Moodo Smart Aroma Diffuser  Teardown, PCB: step 3, image 2 of 2
    • The main PCB connects to the control PCB with a ribbon cable.

    • It can be removed with 2 screws.

    • The 2 cell battery pack is located under the main PCB.

Markus

Member since: 01/01/20

132 Reputation

1 Guide authored

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 4

All Time: 748