Fix Your Stuff Community Store

Kodak EasyShare Printer Dock (Series 3) Teardown

Archived Guide
This guide is retained solely for historical purposes. Use the updated version of the guide to perform your repair.

What you need

  1. Kodak EasyShare Printer Dock (Series 3) Teardown, Kodak EasyShare Printer Dock (Series 3) Teardown: step 1, image 1 of 1

    • Turn the printer face-down so the bottom is showing. Use a PH002 screwdriver to remove the three screws.

    Edit

  2. Kodak EasyShare Printer Dock (Series 3) Teardown: step 2, image 1 of 1

    • Turn the printer so the back-side is showing. Use a PH00 screwdriver to remove the two screws.

    Edit

  4. Kodak EasyShare Printer Dock (Series 3) Teardown: step 3, image 1 of 1

    • Slowly lift the top of the printer until the top panel detaches from the base.

    Edit

  5. Kodak EasyShare Printer Dock (Series 3) Teardown: step 4, image 1 of 1

    • Carefully turn the top panel to expose the three screws on the green chip. The ribbons are flexible, but do not twist them excessively.

    Edit

  6. Kodak EasyShare Printer Dock (Series 3) Teardown: step 5, image 1 of 1

    • Use a PH00 screwdriver to remove the two screws on the green chip.

    Edit
Finish Line

Author

with 1 other contributor

Sarah Allisot

Member since: 10/13/16

101 Reputation

1 Guide authored

Badges: 3

Team

University of Maine, Team 2-3, Diaz Fall 2016 Member of University of Maine, Team 2-3, Diaz Fall 2016

UMAINE-DIAZ-F16S2G3

1 Member

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 1

All Time: 200