Fix Your Stuff Community Store

KAMBROOK 1.7L BPA Free Kettle Teardown

Written By: Teardown Group 4 (and 2 other contributors)
Published: October 15, 2018
  • Comments: 1
  • Favorites: 0
  • Views: 647

KAMBROOK 1.7L BPA Free Kettle Teardown

Written By: Teardown Group 4 (and 2 other contributors)
Published: October 15, 2018
  • Comments: 1
  • Favorites: 0
  • Views: 647

Teardown

Introduction

This guide explains how to take apart the KAMBROOK 1.7L BPA Free Kettle , so you can take those part off by yourself.

What you need

This teardown is not a repair guide. To repair your KAMBROOK 1.7L BPA Free Kettle, use our service manual.

  1. KAMBROOK 1.7L BPA Free Kettle Teardown, KAMBROOK 1.7L BPA Free Kettle: step 1, image 1 of 1

    • Put the device on the table.

    • CAUTION: Make sure the cord is not plugged into the outlet in order to prevent electrocution.

    • CAUTION: Make sure there is no water inside the kettle.

    Edit

  2. KAMBROOK 1.7L BPA Free Kettle Teardown: step 2, image 1 of 1

    • Take off the handle cover and the button on it.

    Edit

  3. KAMBROOK 1.7L BPA Free Kettle Teardown: step 3, image 1 of 1

    • Turn the device upside down and screw down the screws.

    Edit

  4. KAMBROOK 1.7L BPA Free Kettle Teardown: step 4, image 1 of 1

    • Take the bottom cover off .

    Edit

  6. KAMBROOK 1.7L BPA Free Kettle Teardown: step 5, image 1 of 1

    • Pry down the fixed black circle with a screwdriver

    • Caution: Be careful of the tension.

    Edit

  7. KAMBROOK 1.7L BPA Free Kettle Teardown: step 6, image 1 of 1

    • Pry a slit between the kettle body and metal guy with hammer and screwdriver slowly.

    • Cut the rubber band in two halves and take them off.

    • Finally, take the metal guy off.

    Edit

  8. KAMBROOK 1.7L BPA Free Kettle Teardown: step 7, image 1 of 1

    • Turn the device back to the upside.

    • Use a screwdriver to open the top cover.

    Edit

  9. KAMBROOK 1.7L BPA Free Kettle Teardown: step 8, image 1 of 3 KAMBROOK 1.7L BPA Free Kettle Teardown: step 8, image 2 of 3 KAMBROOK 1.7L BPA Free Kettle Teardown: step 8, image 3 of 3

    • After you open the top cover, screw down 2 screws at the bottom of it, then you can get the whole cover off easily.

    • Caution: there have some components inside. DO NOT LOSE THEM!

    Edit

  10. KAMBROOK 1.7L BPA Free Kettle Teardown: step 9, image 1 of 1

    • Now focus on the charging base part.

    • Put that on the table.

    Edit

  11. KAMBROOK 1.7L BPA Free Kettle Teardown: step 10, image 1 of 1

    • screw down three screws off in the middle.

    Edit

  12. KAMBROOK 1.7L BPA Free Kettle Teardown: step 11, image 1 of 1

    • Remove 3 white rubber mat with tweezers.

    • Screw down three screws off below rubber mats.

    • The kettle is now fully disassembled.

    Edit

  13. KAMBROOK 1.7L BPA Free Kettle Teardown: step 12, image 1 of 1

    • The kettle is now fully disassembled.

    Edit

Author

with 2 other contributors

Teardown Group 4

Member since: 10/15/18

205 Reputation

1 Guide authored

Badges: 1

One Comment

why? …………………………

Tatertot - Reply

Add Comment

View Statistics:

Past 24 Hours: 0

Past 7 Days: 2

Past 30 Days: 6

All Time: 647