Tools Featured in this Teardown

Introduction

This information will give you the understanding of how and what makes an ear bud work.

This teardown is not a repair guide. To repair your In-Ear Headphone, use our service manual.

Image 1/2: Image 2/2:
  • As you can see this is your average ear bud, from these two pictures you can see the front and the back.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Take the silver covering off of the ear bud, notice the black wire connecting the two (the wire should be knotted)

Add Comment

Image 1/2: Image 2/2:
  • Now detach the black shell completely.

Add Comment

Image 1/2: Image 2/2:
  • Remove the black wire from the ear bud. Take the copper colored wire out of the black covering

Add Comment

Image 1/1:
  • This is what is inside the ear bud. You will see a silver ring surrounding the wires, and protecting cellophane around it.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • On the ear bud you will see a magnet on the inside of the black encasing, Remove the Magnet from the encasing.

Add Comment

Image 1/2: Image 2/2:
  • This is the copper band that was suronding the magnet.

Add Comment

Image 1/2: Image 2/2:
  • This is the black ring that was around the magnet.

Add Comment

Image 1/3: Image 2/3: Image 3/3:
  • Take the ear bud, with the cellophane like wraping and remove the silver chip

Add Comment

Image 1/2: Image 2/2:
  • This is were the magnet was and were the chip was attached too.

Add Comment

Image 1/1:
  • This is what the Finished product should look like. These are the things that you will find when you take apart you ear bud

Add Comment

Nicki and AJ

Member since: 10/27/2010

243 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 29

Past 30 Days: 117

All Time: 5,763