Skip to main content

What you need

This teardown is not a repair guide. To repair your Datto MP60, use our service manual.

  1. Datto MP60 Teardown, The box: step 1, image 1 of 1
    • MP60 Packaging

  2. Datto MP60 Teardown, Inside the box: step 2, image 1 of 3 Datto MP60 Teardown, Inside the box: step 2, image 2 of 3 Datto MP60 Teardown, Inside the box: step 2, image 3 of 3
    • MP60

    • 6ft Heavy Gauge Line Cable

    • 6ft Ethernet Cable

    • Wall mounting screws

  3. Datto MP60 Teardown, Remove the screws: step 3, image 1 of 1
    • 8x 3mm Triangle bit case screws

    • 9x Philips #1 Screws

    • User resettable 16a breaker

    • 10/100 Ethernet

  4. Datto MP60 Teardown: step 4, image 1 of 1
    • Assembly lifts out as a single piece after removing screws

    • The wifi board and antennas are located as far away as possible from the power supply to avoid interference.

  5. Datto MP60 Teardown, Wifi Board: step 5, image 1 of 2 Datto MP60 Teardown, Wifi Board: step 5, image 2 of 2
    • Qualcomm - QCA9531

    • 560 Mhz CPU (Not too shabby for some outlets)

    • 2x2 B/G/N 2.4 Ghz Wifi

    • Antenna

    • Reset Switch

    • Heatsink

  6. Datto MP60 Teardown, Outlet Control Board: step 6, image 1 of 1
    • STM8S00 - 16Mhz microcontroller

    • Outlet Status LEDs

  7. Datto MP60 Teardown, Outlet Board: step 7, image 1 of 2 Datto MP60 Teardown, Outlet Board: step 7, image 2 of 2
    • 10A Relay

    • Renergy RN7302 3-Phase power metering IC

  8. Datto MP60 Teardown: step 8, image 1 of 1
    • Surge suppression circuitry

    • High quality 120VAC to 5V DC converter

mcwiggin

616 Reputation

3 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 1

Past 7 Days: 1

Past 30 Days: 2

All Time: 1,463