Introduction

This is a teardown of the D-Link DIR 600 router, with information on how to get into the device.

This teardown is not a repair guide. To repair your D-Link DIR 600, use our service manual.

Image 1/1:
  • Screw it off using your hands

Add Comment

Image 1/3: Removing the warranty sticker will ++''VOID '''++ your warranty. Image 2/3: Removing the warranty sticker will ++''VOID '''++ your warranty. Image 3/3: Removing the warranty sticker will ++''VOID '''++ your warranty.
  • There are two screws on the bottom, peel off the black rubber.

  • Removing the warranty sticker will VOID ' your warranty.

Add Comment

Image 1/1:
  • Use a spudger or a flat screwdriver to open it up on both sides.

Add Comment

Image 1/1:
  • Unscrew the two screws

Add Comment

Image 1/1:
  • Use a spudger or a flat screwdriver to take out the logic board

Add Comment

Image 1/1:
  • That concludes our teardown!

Add Comment

Zach luc

Member since: 10/17/2015

383 Reputation

4 Guides authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 3

Past 7 Days: 16

Past 30 Days: 80

All Time: 1,764