Skip to main content

Fix Your Stuff

Right to Repair

Parts & Tools

Tools Featured in this Teardown

This teardown is not a repair guide. To repair your BlitzPro Power Blender, use our service manual.

  1. Depress the container and twist it anti-clockwise to remove. Turn the base upside down. Turn the base upside down.
    • Depress the container and twist it anti-clockwise to remove.

    • Turn the base upside down.

  2. BLUE: use a Y1 tri point screwdriver - turn clockwise to unscrew. RED: unscrew the 4 rubber cups with a #1 phillips head screwdriver and pull them off their mounts. Remove the plastic cover.
    • BLUE: use a Y1 tri point screwdriver - turn clockwise to unscrew.

    • RED: unscrew the 4 rubber cups with a #1 phillips head screwdriver and pull them off their mounts.

    • Remove the plastic cover.

  3. RED: turn the fan clockwise to unscrew it and then lift it off the axle. BLUE: use a #1 Phillips head screwdriver to remove the three screws. Lift the plastic housing out of the metal casing.
    • RED: turn the fan clockwise to unscrew it and then lift it off the axle.

    • BLUE: use a #1 Phillips head screwdriver to remove the three screws.

    • Lift the plastic housing out of the metal casing.

  4. RED: use a #1 Phillips screwdriver to remove the screw. Lift the metal casing off the part.
    • RED: use a #1 Phillips screwdriver to remove the screw.

    • Lift the metal casing off the part.

  5. Manta Driver Kit

    112 bits for every fix.

    Upgrade Your Toolbox

    Manta Driver Kit

    Upgrade Your Toolbox
  6. RED: use a #1 Phillips head screwdriver to remove the three spring components located around the outside of the part. BLUE: use a #1 Phillips head screwdriver to remove the three screws and washers from the triangular metal plate. BLUE: use a #1 Phillips head screwdriver to remove the three screws and washers from the triangular metal plate.
    • RED: use a #1 Phillips head screwdriver to remove the three spring components located around the outside of the part.

    • BLUE: use a #1 Phillips head screwdriver to remove the three screws and washers from the triangular metal plate.

  7. Hold the rotor in place with pliers or a multi-grip and turn the toothed component clockwise to unscrew it. Remove the white plastic part from the rotor by lifting it away vertically. Remove the white plastic part from the rotor by lifting it away vertically.
    • Hold the rotor in place with pliers or a multi-grip and turn the toothed component clockwise to unscrew it.

    • Remove the white plastic part from the rotor by lifting it away vertically.

  8. Use a #1 Phillips head screwdriver to remove the four screws and then lift the the triangular metal plate off the rotor. Use a #1 Phillips head screwdriver to remove the four screws and then lift the the triangular metal plate off the rotor.
    • Use a #1 Phillips head screwdriver to remove the four screws and then lift the the triangular metal plate off the rotor.

  9. Use a #1 Phillips head screwdriver to remove the two screws. Lift the metal plate off the rotor, the rotor can now be removed from its' housing. Lift the metal plate off the rotor, the rotor can now be removed from its' housing.
    • Use a #1 Phillips head screwdriver to remove the two screws.

    • Lift the metal plate off the rotor, the rotor can now be removed from its' housing.

  10. Unscrew the clear container from the white base. BLUE: use a wrench to hold the nut in place. RED: turn the grey toothed component clockwise to unscrew it. Then lift it off the axle.
    • Unscrew the clear container from the white base.

    • BLUE: use a wrench to hold the nut in place.

    • RED: turn the grey toothed component clockwise to unscrew it. Then lift it off the axle.

  11. Use a #1 Phillips head screwdriver to remove the three screws. Lift the metal disc off the axle.
    • Use a #1 Phillips head screwdriver to remove the three screws.

    • Lift the metal disc off the axle.

  12. Now that all the fixtures are removed the blade can be lifted out of the housing. Now that all the fixtures are removed the blade can be lifted out of the housing.
    • Now that all the fixtures are removed the blade can be lifted out of the housing.

  13. Hugh Murphy
    • Hugh Murphy

    • Lara Quigley

    • Marcus Kelly

    • Nathan Rohr

Hugh Murphy

Member since: 04/17/2020

1 Reputation

1 Guide authored

0 Comments

Add Comment

View Statistics:

Past 24 Hours: 2

Past 7 Days: 7

Past 30 Days: 49

All Time: 153