Alactel Joy tab 2 Teardown

Step 1 Alactel Joy tab 2 Teardown

Alactel Joy tab 2 Teardown, Alactel Joy tab 2 Teardown: step 1, image 1 of 1

Tool used on this step:

iFixit Opening Picks (Set of 6)

$4.99

Buy

Pop off the case with Opening Picks and pull off the cover.

Edit

Step 2

There is a LOT of adhesive.

Edit

Step 3

Alactel Joy tab 2 Teardown: step 3, image 1 of 1

I give up.

Edit

Step 4

Alactel Joy tab 2 Teardown: step 4, image 1 of 2

Alactel Joy tab 2 Teardown: step 4, image 2 of 2

Tool used on this step:

Phillips #00 Screwdriver

$5.49

Buy

Remove the circled screws with a Philips 00 driver bit.
Remove these three cables.

Edit

Step 5

Alactel Joy tab 2 Teardown: step 5, image 1 of 3

Alactel Joy tab 2 Teardown: step 5, image 2 of 3

Alactel Joy tab 2 Teardown: step 5, image 3 of 3

Tool used on this step:

Phillips #00 Screwdriver

$5.49

Buy

Unscrew all screws in the boxed in area with a Ph 00bit.
Pry up with an Opening Pick and remove the tape.

Edit

Step 6

Alactel Joy tab 2 Teardown: step 6, image 1 of 2

Alactel Joy tab 2 Teardown: step 6, image 2 of 2

Now remove the mainboard with a Spudger.
Oh look, a baby camera module!

Edit

Step 7

Alactel Joy tab 2 Teardown: step 7, image 1 of 1

I wanted to show the CPU but the RF shields don't come off. I even tried dremeling them but then will not come off.
Thanks for reading.