My Problem
The phone when connected to the charger, gave a error message, use the correct charger, then quit charging, i then conected the phone to the computer, still no charge, and I also noticed that it wouldn't conect to the computer! If I send it for repair, i will lose everything.
My Fix
With Ifixet and YouTube videos, the disassembly went well, but I'm a clutz, to hold a heat gun and prying is not going to work, so I came up with a new idea, with ebay, i found parts to make a cheaper, safer heat source, and it worked like a champion. I got a dead GS5 from eBay and used it to practice with, and it is working now.I want to show my setup but I cannot get my photos here.
My Advice
Go slow, watch the video many times, take notes, especially when sliding the adhesive cutter, the adhesive is only 2 mm wide, and at the bottom be very careful or you could cut the led lights, open from the top and unstick the led pads.
0 Comments