iPhone 6s A1688 US Sprint/Verizon and Global Parts
Choose Category
- All
- Accessories
- Adapters
- Adhesive Pads
- Adhesive Strips
- Antennas
- Batteries
- Buttons
- Cables
- Cameras
- Case Components
- Clips
- Dock Connectors
- Earbuds
- Flash
- Gripping
- Headphone Jacks
- iFixit Exclusives
- iFixit Gear
- Lenses
- Lightning Connector
- Logic Boards
- Microphones
- Microsoldering
- Prying and Opening
- Screens
- Screws
- Sensors
- SIM
- Speakers
- Teardown Case
- Test Cables
- Vibrators
iPhone 6s/6s Plus/7/7 Plus Bottom Screws
Replace the 2 screws in the bottom exterior of your phone. Compatible with an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus.
iPhone 6s NFC Bracket
Replace the short flex cable that connects the NFC (Near Field Communication) Antenna to the Logic Board compatible with the iPhone 6s. Fix connection to contactless paym...
iPhone 6s LCD Shield Plate Sticker
Replace a torn or missing black adhesive cover on the back of the LCD shield plate compatible with the iPhone 6s model A1633, A1688, and A1700 smartphone.
iPhone 6s Front Panel Assembly Cable Bracket
Fix a loose connection causing a malfunctioning display, digitizer, or camera by replacing a bent or missing metal bracket securing the front panel assembly cable connect...
iPhone 6s Upper Cable Bracket
Fix a loose connection causing an unresponsive volume or power button by replacing a bent or missing metal bracket securing the audio control and power button cable conne...
iPhone 6s Flash Bracket
Fix a misaligned flash by replacing a bent or missing metal bracket securing the camera flash to the rear case. This part is compatible with an iPhone 6s.
iPhone 6s Earpiece Speaker Bracket
Replace the metal bracket that secures the earpiece speaker to the display assembly compatible with the iPhone 6s model #A1633, A1688, A1700.
iPhone 6s Vibrator
Replace a malfunctioning linear oscillating vibrator. This part is compatible with an iPhone 6s.
USB Power Adapter for iPhone and iPod
5W adapter used for iPhones and iPods.
iPhone 6s and 6s Plus Home Button Gasket
Replace a torn flexible gasket between the home button assembly and the display assembly in an iPhone 6s or iPhone 6s Plus.
iPhone 6s Microphone Mount
Replace a punctured or missing plastic mount and anti-dust mesh for the lower left microphone and keep dust and dirt from blocking the microphone. This part is compatible...
iPhone 6s Loudspeaker Mount
Replace a punctured or missing plastic mount and anti-dust mesh for the loudspeaker and lower right microphone compatible with iPhone 6s. Keep dust and dirt from blocking...
iPhone 6s Home Button Bracket
This metal bracket secures the home button assembly to the display assembly.
iPhone 6s/6s+/7 Backlight Driver LM3539
Replace a LM3539 backlight driver on the logic board of an iPhone 6s, iPhone 6s Plus, or iPhone 7. This part requires micro soldering.
iPhone 6s Rear Camera Lens Cover
Replace an external lens cover for the rear-facing camera compatible with iPhone 6s. Includes the metal bezel ring.
iPhone 6s Display Assembly Adhesive
This custom cut adhesive film secures the front screen display assembly to the case of an iPhone 6s.
iPhone 6s Earpiece Speaker
Replace an earpiece speaker compatible with the iPhone 6s model #A1633, A1688, A1700. Fix problems with call audio.
iPhone 6s Logic Board EMI Shield Stickers
Replace a set of four adhesive electromagnetic interference shield covers on the logic board compatible with the iPhone 6s.
iPhone 6/6s/7 Backlight Diode
Replace the backlight diode on the logic board of an iPhone 6, iPhone 6s, iPhone 6s, or iPhone 7. This part requires micro soldering.
iPhone Tigris SN2400B0 Charging IC
Replace an SN2400B0 charging IC on the logic board of an iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro solderin...
iPhone Display PMU 65730A0P
Replace a 65730A0P display PMU on the logic board of an iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part re...
iPhone and iPad Tristar A1610A3
Replace a A1610A1, A1610A2, or A1610A3 USB IC on the logic board of an iPhone 5c, iPhone 5s, iPhone 6, iPhone 6 Plus, iPhone 6s, iPhone 6s Plus, iPad Air, or iPad mini 2....
iPhone and iPad LCD Data Choke
Replace a LCD data choke on the logic board of an iPhone or iPad. This part requires micro soldering.
iPhone 6s and 6s Plus Front-Facing Camera Holder
Fix a misaligned camera by replacing the plastic guide that centers the front-facing camera over the camera lens opening in the front glass panel. This part is compatible...
iPhone 6/6s/7 Battery Adhesive Strips
Replace the adhesive film that secures the battery to the rear case compatible with the iPhone 6, iPhone 6s, and iPhone 7 smartphone models A1549, A1586, A1589, A1633, A1...
iPhone 6s/6s Plus/7/7 Plus Backlight Filter
Replace a backlight filter on the logic board of an iPhone 6s, iPhone 6s Plus, iPhone 7, or iPhone 7 Plus. This part requires micro soldering.
iPhone 6s LCD/Digitizer FPC Connector (J4200)
Replace a LCD Digitizer cable FPC connector on the logic board compatible with the iPhone 6s model A1633 and A1688. This part requires microsoldering.
iPhone 6 Home FPC Connector (J2118)
Replace the home button cable FPC connector on the logic board of an iPhone 6. This part requires microsoldering.
iPhone 6s Lightning Connector Cable Adhesive
Replace the adhesive area on the flex cable of the lightning connector assembly compatible with the iPhone 6s.
iPhone 6s Battery Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly compatible with the iPhone 6s. Includes a set of 5 pads.
iPhone 6/6s Antenna Interconnect Cable Clip
Replace the small metal clip that holds the antenna cable from the lightning connector assembly against the side of the loudspeaker assembly compatible with the iPhone 6 ...
iPhone 5 to 6s Plus Front Camera Gasket Pads
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE (1st Gen), 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.