Fix Your Stuff

Right to Repair

Parts & Tools

iPod nano (1st Gen) Replacement Battery

  • iPod nano (1st Gen) Replacement Battery / Part Only
  • 360°
360
iPod nano (1st Gen) Replacement Battery

$13.99

$13.99

We'll send a message when the product is back in stock.

Manta Driver Kit

112 bits for every fix.

Upgrade Your Toolbox

Manta Driver Kit

Upgrade Your Toolbox

Product Details

Description

Description

This iPod nano (1st Gen) replacement battery is what you need to bring your dead iPod back to life!

Battery degradation is an inevitable part of your iPod's lifespan — extend it with this new replacement battery compatible with the first generation iPod nano. If your iPod won’t turn on, won’t hold a charge, or you simply experience poor battery life, this replacement battery may be what you need to fix it.

Compatibility

Compatibility

  • iPod nano (1st Gen)

Specifications

Specifications

Model #:
616-0224
Milliamp Hours:
400 mAh
Manufacturer:
Aftermarket

Compatibility

iPod Nano 1st Generation
A1137 1GB
A1137 2GB
A1137 4GB

Repair Stories

User avatar

My Problem

the old battery was down to 40 minutes run time on a full charge. time for a new battery.

My Fix

opening the case was the hardest part. once that hurdle was overcome the rest was pretty straight forward. ipod is like new, plays for several hours now.

My Advice

i did not disconnect any of the ribbon cables between t . . .

User avatar

My Problem

My 1G iPod Nano wasn't holding a charge. It would only last about an hour before zeroing out :(

My Fix

The instructions were easy enough to understand. Some of the soldering was a little challenging, almost like I needed three or four hands at once....but voila! Done and Done! Looks exactly like it did . . .

User avatar

My Problem

Battery not holding charge for long.

My Fix

Excellent. My wife is happy with her "new" iPod.

My Advice

I placed a comment on the guide page as to the modifications to the process I made. Much simpler. Less skill required.

User avatar

My Problem

The battery doesn't work perfectly and was old. Also the new iPod battery that ifixit sell have more mAh so I've decided to change it.

My Fix

The repair was long and I was been careful. At the end the iPod worked perfectly and the battery give me more hours.

My Advice

I have an important advice about the ground str . . .

User avatar

My Problem

First generation iPod nano was lasting less than two hours on the original battery.

My Fix

Repair went smoothly. Took about three hours from start to finish.

My Advice

Take your time.

User avatar

My Problem

I bought a used iPod nano on ebay and the battery didn't work (they didn't tell me about that part)so I decided to try and fix it.

My Fix

I have used a soldering iron before so, I thought how hard can this be. Watched the video acouple of times. It was very straight forward. My iron might have gotten too . . .

User avatar

My Problem

The battery in the Nano I found was dead. I guess that's why it was thrown out.

My Fix

The repair was relatively easy and straightforward. Getting the case open is tricky, especially as the plastic tool provided doesn't hold up too well against the Nano's metal backing. But the instructions were easy to . . .

User avatar

My Problem

After 5 years of operation my Daughters little iPod nano (G1) gave up the ghost due to a faulty battery. The battery actually expanded and "popped" the case open. My daughter was distraught that she could not listen to here "Phineas & Ferb".

My Fix

Repair was easy. The case was already open due to the bloat . . .

Show more