Click Image To Zoom
California Prop 65
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. Learn more >
March 20, 2015
I had an iPod touch 4th generation I was told was no good, and it had a broken screen and the Home button was missing. I connected it to my computer, updated the iOS and loaded some music on it and it played fine. So I ordered a new screen and home button.
Since this was my second iPod touch that I attempted to fix (the first I ended up taking in to get fixed) it went better than my first try. I got the screen all connected and everything but the screen put back where it all belonged and turned it on. I got the white screen of death.
After much frustration, I reset the device by pushing Home button, the power button and the up volume button all at the same time. It booted to the set up screen so I turned it off, put the adhesive strips on and the screen on. I turned it on and got the white screen of death again. This time it would not reset at all.
Before you start make sure you're in a good frame of mind. There's lots of tiny parts and screws, along with fragile boards and connectors. It's not a hard fix (if things go well), just a bit tedious working with the small parts.
March 3, 2014
home buttom didn't work
I change it following your instruction, it went well, but it didn't solve the problem.
You should offer all the necessary part that might be change with the buttom and the strip of glue so we may order every thing at once.