iPod nano Gen 4 Replacement Battery

 
 
 
 

iPod nano Gen 4 Replacement Battery

$15.95

$15.95

Product Details

Features

Features

Installation requires soldering of battery to logic board.

Fix Kit Contents:

  • New 250 mAh Replacement Battery
  • Small Phillips #00 Screwdriver
  • Plastic Opening Tool
  • Spudger

Additional Required Tools:

 

Compatibility

 

Related Stories

User avatar
maxdelamure's Story Photo #315054

My Problem

I bought my iPod 5 years ago and it began to have battery problem 5 months ago.

After one day of use, it ran out of battery... It was illogic for me to buy another one as it was working very well (if you ignore this *** battery !)

My Fix

NO PROBLEM, except the soldering part. I asked a friend of mine, who . . .

User avatar

My Problem

battery - get rid of it or so just risk it?

My Fix

Complex, needed 3 trials covering about 3 hours total. First the connection of the battery did not work, then the selector did not respond ...

My Advice

Patience, as the reward is big. Try to check each step via function before putting everything back together. I do l . . .

User avatar

My Problem

The battery wasn't holding a charge and so I thought I would fix it rather than toss it and replace it.

My Fix

This did not go well. I did get the iPod apart and had no real problem attaching the new battery despite the fact that the solder connections are so small. However, reassembly was difficult, perh . . .

User avatar

My Problem

The battery of the iPod Nano was completely dead.

My Fix

It took me 2 hours to take the iPod apart and another 3 hours for soldering and reassemble it.

My Advice

When you reassemble the iPod don't forget to use some glue because I had the problem that the caps that you have to take apart in step 1 are not any longer s . . .

User avatar

My Problem

The battery failed to hold a charge

My Fix

The only real difficulty was initially opening the case. Had to use a knife to break the glue seal on both ends but after that, your procedure was carefully followed with eventual success

My Advice

To help in re-assembly, I used strips of thin cardboard (from the battery ship . . .

User avatar

My Problem

I purchased a used 4th Gen Nano from a pawn shop and soon discovered that it had a bad battery.

My Fix

I ended up ruining this ipod. Step 4 or 5 in the guide did not account for the instance of the display tray/assembly being stuck in the casing. I tried to get it loose for about two hours and finally ruine . . .

User avatar

My Problem

Batterie HS aprés seulement 1 an d'utilisation, il y a 6 ans... Depuis, l'ipod dormait dans un tiroir. La batterie pour ce modèle qui m'avait été offert par un ami américain n'était pas disponible sur le site ifixit en Europe. J'ai du la commander au Etats Unis.

My Fix

Assez long, quelques déboires m . . .

User avatar

My Problem

Batterie HS aprés seulement 1 an d'utilisation, il y a 6 ans... Depuis, l'ipod dormait dans un tiroir. La batterie pour ce modèle qui m'avait été offert par un ami américain n'était pas disponible sur le site ifixit en Europe. J'ai du la commander au Etats Unis.

My Fix

Assez long, quelques déboires m . . .

User avatar

My Problem

I had an IPod Nano 4th Generation that just died. No resetting, button-pushing, or plugging it into a computer or wall charger would bring it back to life. I had several audio books that weren't backed-up anywhere else that I really wanted to rescue (long story).

My Fix

I'm a skilled DIY'er who fixes my o . . .