iPod Classic 160 GB
iPad USB 10W AC Adapter (Original)
Charge your iPad with AC power. This is an OEM original Apple model A1357 adapter.
iPod Classic Color Display
Replace the 320x240 pixel 2.5" display LCD screen in any iPod Classic.
iPod Classic Click Wheel
Does not include button
iPod Classic Click Wheel Button
Plastic button only
USB Power Adapter for iPhone and iPod
5W adapter used for iPhones and iPods
iPod Classic Metal Framework
Replace the frame and rubber bumpers that hold the logic board and screen in place.
iPod Classic Front Panel
Does not include click wheel
iPod Classic Screw Set
All screws from iPod / 12 Phillips screws
iPod Classic Click Wheel Plastics (Silver)
Does not include electronics or button
iPod Classic (160 GB) Color Display
Replace the 320x240 pixel 2.5" LCD screen in a 160 GB iPod Classic.
The "thick" version of 160 GB iPod Classic is the original larger-capacity Classic. Apple has since simplified the Classic line to offer only the "thin" version. In September 2009, a new thin 160 GB was introduced. If you are unsure which version you have (as some parts are not interchangeable between models), perform the following steps:
1) Locate the serial etched on the rear panel of the iPod
2) Go to Apple's Online Service Assistant and enter your serial number and country
3) Look at the text under the picture on the left. If it reads "iPod Classic," you have the thick version. If it reads "iPod Classic (Late 2009)," you have the thin version.
The iPod Classic is quite enigmatic to diagnose when problems occur. Use our iPod Classic troubleshooting guide to figure out what's wrong.
Select a category below or browse all compatible parts to find what you need to fix your iPod!