iPhone 6s A1633 Adhesive Pads
Grab a toolkit for your iPhone 6s A1633 model and fix your broken phone!
iFixit has you covered with parts, tools, and free repair guides. Repair with confidence! All of our replacement parts are tested to rigorous standards and backed by our industry-leading warranty.
Choose Category
- All
- Accessories
- Adapters
- Adhesive Pads
- Adhesive Strips
- Antennas
- Batteries
- Buttons
- Cables
- Cameras
- Case Components
- Clips
- Dock Connectors
- Earbuds
- Flash
- Gripping
- Headphone Jacks
- iFixit Exclusives
- iFixit Gear
- Lenses
- Lightning Connector
- Logic Boards
- Microphones
- Microsoldering
- Prying and Opening
- Screens
- Screws
- Sensors
- SIM
- Speakers
- Test Cables
- Toolkits
- Vibrators
Parts that work with iPhone 6s A1633:
iPhone 5 to 6s Plus Front Camera Gasket Pads
Replace the adhesive gasket ring on the lens end of the front-facing camera of an iPhone 5, 5s, 5c, SE, 6, 6 Plus, 6s, or 6s Plus. Set of 5 gaskets.
iPhone 6s Battery Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the battery cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Front Camera Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the front-facing camera and sensor cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Rear Camera Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the rear-facing camera cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Audio Control Cable Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the audio control cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Lightning Port Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the logic board connector for the lightning port assembly in an iPhone 6s. Set of 5 pads.
iPhone 6s LCD Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the LCD cable connector in an iPhone 6s. Set of 5 pads.
iPhone 6s Digitizer Connector Foam Pads
Replace the adhesive backed foam spacer on the back of the digitizer cable connector in an iPhone 6s. Set of 5 pads.
Device Info
The iPhone 6s is nearly identical in design to the iPhone 6. In response to the “bendgate” design flaws of the previous models, changes were made to improve the durability of the chassis. The 6s was constructed from a stronger, 7000 series aluminum alloy, key points in the rear casing were strengthened, and touchscreen integrated circuits were relocated to the display assembly. Alongside the existing gold, silver, and space gray options, a new rose gold color option was also introduced.
One of the largest reported hardware issues with the iPhone 6s was unexpected battery shutdowns. Apple issued a warranty for phones with a limited span of serial numbers, however if your phone doesn’t fall under this category, don’t worry — iFixit has all the parts necessary for the most common iPhone 6s fixes including dead battery replacements and cracked screens. We’ve got the best iPhone 6s batteries and iPhone 6s screens on the market, along with a complete catalog of other iPhone 6s parts for the less common part swaps.
All iPhone 6s repairs will require a Pentalobe P2 screwdriver in addition to standard precision electronics tools. Any repair that removes the battery from the chassis will require replacement adhesive strips. All iFixit Fix Kits come with all tools and replacement adhesive needed to complete the repair.
Once all parts and tools have been acquired, head to iFixit’s iPhone 6s repair guides for step-by-step instructions on how to make the fix.
The iPhone 6s earned a 7 out of 10 in iFixit’s repairability assessment. Watch the Teardown Review for more: