iPhone 5s/SE LCD Screen and Digitizer - Choice

iPhone 5s/SE LCD Screen and Digitizer - Choice

$59.99

$59.99

We'll send a message when the product is back in stock.

Black Friday
Broken doesn't stand a chance.

Product Details

Features

Features

This part will only work in an iPhone 5s or SE. It will not work in an iPhone 5c or iPhone 5. Identify your iPhone correctly in one step.

The Touch ID function will only work with your phone's original home button assembly.

  • This part will come with the speaker mesh, proximity sensor bracket and front camera lens bracket already installed.


Interested in wholesale discounts?

Check out iFixit Pro


Compatibility

iPhone 5s
16 GB
32 GB
64 GB
iPhone SE
A1662 US AT&T/T-Mobile/Verizon
A1723 US Sprint and Global
A1724 Mainland China

Repair Stories

User avatar

My Problem

My screen was badly cracked.

My Fix

It was much harder than I thought it would be, but the photos and directions were clear and helpful.

My Advice

I would've completely forgot about moving the camera to the new screen if my boyfriend hadn't noticed that I needed to. The guide I was using didn't say anything about mov . . .

User avatar

My Problem

Shattered Screen

My Fix

It was not difficult but a bit harder than I expected since I have to take off and reuse the original parts (Touch ID sensor, Front facing camera, ...). Have access to a heat gun in the lab helps. Overall it is pretty fun to do this myself.

My Advice

One, make sure to follow the guide and no . . .

User avatar

My Problem

After owning several iPhones the se was the first one I broke. A six foot fall to the concrete was too much.

My Fix

With this being my first broken phone it was also my first repair. After reading all the instructions the repair went smooth.

My Advice

The screen appeared to be good quality, but after 1 day a weird bre . . .

User avatar

My Problem

Cracked screen

My Fix

Very well

My Advice

Not for the average technician... I have 30+ years electronic repair.

User avatar

My Problem

Watched the video & thought it would be easy.

My Fix

No Problem.

My Advice

Wasn't very clear on the backing plate, but after reading the instructions I realized I didn't have to remove the adhesive ground from one of the connectors.

User avatar

My Problem

The touchscreen wasn't responding well. I bought a new display assembly to replace the old one.

My Fix

Turned out the problem is probably with the digitizer connector on the logic board. There are a couple of little metal connections that seem to have broken, and the touch screen is consequently unresponsiv . . .

Show more