iPad mini 1st Gen
Board Component Bundle
This collection of iPhone, iPad, and Galaxy S III components is perfect for anyone learning microsoldering and board level repair.
iPad 2/3/4 and mini Backlight Diode
Replace the backlight diode on the logic board of an iPad 2, 3, 4, or 1st generation iPad mini. This part requires micro soldering.
iPad 2/3/4 and mini Backlight Filter
Replace the backlight filter on the logic board of an iPad 2, 3, 4, or 1st generation iPad mini. This part requires micro soldering.
iPad mini & mini 2 Test Cable for Digitizer
This test cable simplifies connecting and testing Digitizers for 1st and 2nd generation iPad minis.
iPad mini Lightning Connector
Replace the lightning connector and its cable. This part requires micro soldering.
iPad mini & mini 2 Digitizer FPC Connector
Replace the digitizer cable connector on the logic board of an iPad mini or iPad mini 2. This part requires microsoldering.
iPad mini U2 1608 IC
Replace a U2 1608 IC on the logic board of a 1st generation iPad mini. This part requires microsoldering.
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
iPad mini Battery
Battery for the iPad mini
iPad mini & mini 2 Digitizer Magnets
Replace the two magnets mounted on the inside of the digitizer for the sleep/wake sensors.
Apple released the iPad Mini on November 2, 2012, a smaller and lighter version of the iPad tablet featuring a 1024-by-768 163 pixel per inch touch-sensitive display, a dual core 1 GHz processor, 512 MB of RAM, and three flash memory options of 16, 32, or 64 GB. External connection and power supply is handled by a Lightning port, in place of the Dock Connector port of earlier iPads. The iPad Mini has a rear-mounted 5 megapixel "iSight" camera and a front-mounted 1.2 megapixel "FaceTime HD" camera.