iPad Pro 9.7" Parts
iPad Pro 9.7" (Cellular) Logic Board Connector Cable
Replace a torn or corroded connector flex cable on the logic board of a cellular model 9.7 inch iPad Pro. This part requires microsoldering.
iPad Pro 9.7" (Wi-Fi) Logic Board Connector Cable
Replace a torn or corroded connector flex cable on the logic board of a Wi-Fi model 9.7 inch iPad Pro. This part requires microsoldering.
iPad Pro 9.7" Adhesive Strips
These custom cut adhesive strips attach the front panel to the case of the 9.7 inch model iPad Pro.
iPad Pro 9.7" Front Camera
Replace the front-facing 5 MP camera for the 9.7 inch iPad Pro.
iPad Pro 9.7" Home Button
Replace the home button, home button cable, and metal bezel in black, silver, gold, or rose gold for the iPad Pro 9.7". This part does not include the gasket.
iPad Pro 9.7" Home Button Assembly
Replace the home button and flex cable assembly for the iPad Pro 9.7" and fix an unresponsive home button.
iPad Pro 9.7" LCD Screen and Digitizer
This assembly includes the LCD and glass digitizer screen.
iPad Pro 9.7" Left Wi-Fi/Bluetooth Antenna
Replace the antenna for Wi-Fi and Bluetooth connections in a 9.7 inch iPad Pro.
iPad Pro 9.7" Lightning Connector
Replace the lightning connector and its cable for a 9.7 inch iPad Pro. This part requires micro soldering.
iPad Pro 9.7" Power Button Assembly
This assembly includes the internal power button switch, one microphone, and one ambient light sensor.
The iPad Pro 9.7" is smaller version of Apple's original 12.9" high performance tablet. Like its larger counterpart, the Pro 9.7" features an A9X processor, support for the Apple Pencil, and a 4-speaker audio setup.
Identifying the 9.7-inch iPad Pro can be difficult, as it has the same physical dimensions and weight as the iPad Air 2. Compared to the Air 2, the Pro features a three-pin Smart Connector along its left edge, as well as speaker grilles on the top and bottom edges. The Pro's model number, A1673 (Wi-Fi Only) or A1674 (Wi-Fi and Cellular), is etched on its rear case.
The most common repairs for the 9.7 inch iPad Pro are replacing a cracked front glass screen or a dead battery. The iPad Pro 9.7" front glass panel is held to the aluminum case with strips of adhesive. Once the device is opened, this adhesive will need to be replaced.
The iPad Pro 9.7" earned a 2 out of 10 in iFixit's repairability assessment. Watch the Teardown Review for more: