iPad Pro 9.7"
SIM Card Eject Tool
Safely eject the SIM card from Apple GSM/LTE devices (iPhones and iPads) and other electronic devices.
Lightning to USB Charging Cable
Charge or sync lightning port equipped portable Apple devices
iPad Pro 9.7" Adhesive Strips
These custom cut adhesive strips attach the front panel to the case of the 9.7 inch model iPad Pro.
iPad Pro 9.7" LCD Screen and Digitizer
This assembly includes the LCD and glass digitizer screen.
iPad Pro 9.7" Home Button Assembly
Replace the home button, home button cable, gasket, and metal bezel in black, silver, gold, or rose gold for the iPad Pro 9.7"
iPad Pro 9.7" Front Camera
Replace the front-facing 5 MP camera for the 9.7 inch iPad Pro.
iPad Pro 9.7" Smart Cover Connector
Replace the contacts for the smart cover.
iPad Pro 9.7" Test Cables for Display Assembly
This set of three test cables simplifies connecting and testing the LCD, digitizer, and home button in a display assembly for a 9.7 inch iPad Pro.
iPad Pro 9.7" Power Button Assembly
This assembly includes the internal power button switch, one microphone, and one ambient light sensor.
iPad Pro 9.7" Lightning Connector
Replace the lightning connector and its cable for a 9.7 inch iPad Pro. This part requires micro soldering.
The iPad Pro 9.7" is smaller version of Apple's original 12.9" high performance tablet. Like its larger counterpart, the Pro 9.7" features an A9X processor, support for the Apple Pencil, and a 4-speaker audio setup.
Identifying the 9.7-inch iPad Pro can be difficult, as it has the same physical dimensions and weight as the iPad Air 2. Compared to the Air 2, the Pro features a three-pin Smart Connector along its left edge, as well as speaker grilles on the top and bottom edges. The Pro's model number, A1673 (Wi-Fi Only) or A1674 (Wi-Fi and Cellular), is etched on its rear case.