iPad 2nd Gen
Choose your model of iPad 2nd Gen:
iPad 2/3 U2 IC
Replace a U2 IC on the logic board of a 2nd or 3rd generation iPad. This part requires microsoldering.
iPad 2/3/4 Digitizer ZIF Connector
Replace the a digitizer cable connector on the logic board of a 2nd, 3rd, or 4th generation iPad. The digitizer cable is inserted into two of these connectors on the logi...
iPad 2 Display Data FPC Connector
Replace the LCD data connector on the logic board of a 2nd generation iPad. This part requires microsoldering.
iPad 2/3/4 and mini Backlight Filter
Replace the backlight filter on the logic board of an iPad 2, 3, 4, or 1st generation iPad mini. This part requires micro soldering.
iPad 2/3/4 and mini Backlight Diode
Replace the backlight diode on the logic board of an iPad 2, 3, 4, or 1st generation iPad mini. This part requires micro soldering.
Board Component Bundle
This collection of iPhone, iPad, and Galaxy S III components is perfect for anyone learning microsoldering and board level repair.
As the second device in the iPad line, the iPad 2 gained a faster dual core A5 processor, a lighter build structure, and was the first iPad to feature VGA front-facing and 720p rear-facing cameras designed for FaceTime video calling. The second generation iPad device has a 9.7” touchscreen display with 1024x768 pixel resolution and 132 ppi, and is equipped with either 16, 32, or 64GB of solid-state memory for program and data management.
There are four models of the second generation iPad. The Wi-Fi (EMC 2415), GSM, and CDMA were released in the United States on March 11, 2011, followed by the Wi-Fi (EMC 2560) in March of 2012, which is only available in the 16 GB capacity. This generation of iPad was the first to incorporate compatibility with the CDMA network.
The 32 and 64 GB models were discontinued on March 7, 2012, upon the introduction of the third generation iPad. The 16 GB Wi-Fi and 16 GB Wi-Fi + 3G models were discontinued on March 18, 2014.
Select your model above for parts, guides and more.