iPad 2 Wi-Fi (EMC 2415) Parts
Parts that work with iPad 2 Wi-Fi (EMC 2415):
iPad 2 Front Camera Bezel
Replace the metal camera bracket on the inside of an iPad 2nd generation front panel.
iPad LCD filter L2201
Replace an LCD filter L2201 on the logic board of an iPad 2, iPad 3, iPad 4, iPad mini, or iPad mini 2. This part requires micro soldering.
iPad 2 LCD FPC Connector (J2201)
Replace the LCD FPC connector on the logic board of a 2nd generation iPad. This part requires microsoldering.
iPad 2/3/4 Digitizer FPC Connector (J3010)
Replace the a digitizer cable FPC connector on the logic board of an iPad 2, 3, or 4. The digitizer cable is inserted into two of these connectors on the logic board. Thi...
iPad 2/3 U2 IC
Replace a U2 IC on the logic board of a 2nd or 3rd generation iPad. This part requires microsoldering.
iPad 2 Wi-Fi Headphone Jack
This headphone jack assembly is compatible with Wi-Fi iPad 2 models excluding 16GB EMC 2560.
iPad 2/3/4/Mini/Mini 2 Backlight Diode
Replace the backlight diode on the logic board of an iPad 2, 3, 4, or 1st or 2nd generation iPad mini. This part requires micro soldering.
iPad 2/3/4/Mini/Mini 2 Backlight Filter L2200
Replace the backlight filter on the logic board of an iPad 2, 3, 4, or 1st or 2nd generation iPad mini. This part requires micro soldering.
iPad 2 Rear Camera Retaining Bracket
This metal retaining clip bracket and thermal pad fit over the rear facing camera.
iPad 2 Rear Camera Enclosure
This is the plastic enclosure for the rear facing camera.
The iPad 2 Wi-Fi (EMC 2415) was released on March 11, 2011. This model offers an upgraded A5 processor compared to its predecessor.
The most commonly needed repairs for the second generation iPad are cracked screens and dead battery replacements. iFixit has the best 2nd Gen iPad displays and 2nd Gen iPad batteries on the market, along with a complete catalog of other second generation iPad parts for the less common part swaps.
All first generation iPad repairs will require a set of standard precision electronics tools. Any repair that involves removing the front panel will require iPad 2 adhesive strips to ensure a full coverage and secure bond between replaced parts. All iFixit Fix Kits come with all tools and adhesive needed to complete the desired repair.
Once all parts and tools have been acquired, head to iFixit’s iPad 2 repair guides for step-by-step instructions on how to complete your desired repair.