iPad 2 Wi-Fi (EMC 2560)
iPad 2 Front Glass/Digitizer Touch Panel Full Assembly
This assembly includes the glass touch panel portion of the display digitizer screen, a blank home button, and adhesive. A perfect replacement for any cracked, broken, or...
iPad 2/3/4 Display Bezel
Replace the plastic black or white trim that goes around the border of the front panel glass.
iPad 2 Adhesive Strips
These custom cut adhesive strips attach the front panel to the rest of the iPad 2. If you replace a cracked or broken iPad display assembly or screen, you will need new a...
iPad 2 Front Glass/Digitizer Touch Panel
This replacement iPad 2 front panel digitizer screen is the glass touch panel portion of the display assembly and does not include the home button assembly. It is compati...
iPad 2 Battery
Replace a model A1376 battery for the iPad 2.
iPad 2 Dock Connector
This assembly includes the dock connector socket and the flex cable that connects to the logic board.
iPad 2nd and 3rd Gen Home Button Assembly
This part includes the plastic home button, mounting bracket, control board switch and the button spring.
iPad USB 10W AC Adapter (Original)
Charge your iPad with AC power. This is an OEM original Apple model A1357 adapter.
iPad 2/3/4 Home Button with Spring
This is the external button face with attached spring.
iPad 2 Screw Set
This set includes all the internal screws for the iPad 2.
In March 2012 Apple began shipping a new version of the iPad 2 Wi-Fi available only in the 16 GB capacity. Externally, the new model can be identified by the EMC number located on the back of the iPad.
Internally, this version has a physically smaller 32 nm 1 GHz "dual core" A5 processor and is only available with 16 GB of flash memory. Like the previous version, it has a 1024x768, 132 ppi display, front and rear mounted cameras, and 802.11a/b/g/n Wi-Fi support in a 0.34 inch thick, 1.33 pound glass and aluminum case with a black or white front and an aluminum back.