iPad 1st Gen
iPad 3G (1st Gen) Logic Board
Replace a broken or malfunctioning motherboard in a 1st Generation iPad 3G.
iPad Logic Board
This is the iPad 1st Generation Wi-Fi main circuit board assembly.
iPad 3G Front Panel Digitizer Assembly
Touch portion of display with the frame, antenna, home button and clips.
iPad LCD Panel
This is the LCD display screen of 1st generation iPad Wi-Fi. This does not include the front glass digitizer panel.
iPad Front Panel Digitizer Assembly
This is the touch sensitive portion of front screen and includes the frame, home button and clips.
Replace the model A1315 battery in your 1st generation iPad.
iPad Display Clip Set
Replace the broken or missing spring clips on the back of the 1st generation iPad display screen.
iPad Screen Protector
Keep your iPad looking pristine. Protect you screen from scratches and blemishes.
iPad Headphone Jack/Microphone Assembly
This assembly includes the headphone jack and microphone for 1st generation iPad Wi-Fi.
iPad LCD Flex Cable
This cable connects the logic board to the LCD display.
The first generation of the iPad established design precedents, some of which, such as the home button placement, have persisted through all models. The device features an Apple A4 processor — which is comprised of a 1 GHz processor, 256 MB of RAM and a PowerVR SGX535 GPU — and a 9.7” touchscreen display with 1024x758 pixel resolution and 132 ppi. The first generation iPad is equipped with either 16, 32, or 64GB of solid-state memory for program and data management.
There are two models of the first generation iPad. The Wi-Fi variant was released in the United States on April 3, 2010, followed by the Wi-Fi and Cellular variant on April 30, 2010. Unlike its successors, the Wi-Fi and cellular variant of the first generation iPad can only support GSM/UMTS standards and is not compatible with CDMA networks.
Select your model above for parts, guides and more.