iPhone 5 Home Button

$6.95

Product code: IF118-008

Click Image To Zoom

 
 
 
 

iPhone 5 Home Button

$6.95

Product code: IF118-008

Product Overview

Fix that broken home button!

  • Is your button scratched? Cracked? Replace it!
  • This part includes the rubber gasket that goes around the home button and the metal insert that is on the back of the button.
  • This part is only the button itself and does not include the home button cable. If your home button is not working properly chances are it's the cable and not this part. We do sell the home button ribbon cable too.

Compatibility

Identify your iPhone

  • All iPhone 5 Models (Not iPhone 5s or 5c)

Product Details

$6.95 Black

 
 
 

Condition:

New

Warranty:

One year warranty

$6.95 White

 
 
 

Condition:

New

Warranty:

One year warranty

$4.95 Black / Used

 
 
 

Condition:

Used, fully tested

Warranty:

One year warranty

$4.95 White / Used

 
 
 

Condition:

Used, fully tested

Warranty:

One year warranty

Add to Cart
 

Install Videos

 

Compatibility

iPhone 5
16 GB
32 GB
64 GB
 

Stories

My Problem

The home button on my iPhone 5 fell off and could not use the phone anymore.

My Fix

It went very well. I bought the button and the tools from your site and I used the excellent video that you guys made. I followed it to the letter and had no issues, it took me set by step until the job was completed. I was done in less than 30 minutes.

I did not have the heat pad so I used a blow dryer to help loosen up the button cable very carefully which I would not recommend doing. But, if you have no choice set it to the lowest level of heat and air speed and keep it away from the tiny screws. I was done in about 30 minutes.

My Advice

Get the tools for the job because it will make your job go without a hitch and do not deviate from the video instructions.

My Problem

Battery would not hold Charge and Home Button seal was broken making Button feel loose.

My Fix

All Replacement parts - New Battery/ New Home Button- from IFixit Worked Great. As For the repair overall very smooth. I Found Ifixit on YouTube under Iphone repair they have plenty of useful clips on there. This is my second iphone repair using IFixit parts very Pleased So Far!

My Advice

It was all Pretty Simple really. The Key is dont be in a big hurry and keep track of all the screws as you take them out.

My Problem

My home button on my iPhone 5 completely broke off. I was unable to use the device after.

My Fix

The repair went smoothly. It's truly amazing what can be accomplished when you have the right tools for the job. "ifixit" provided everything I needed to get the home button replaced and I did it in the comfort of my own home.

My Advice

My advice would be to get the right tools the first time and save yourself the hassle and frustration. Getting the job done right with no hiccups is key and very rewarding.

My Problem

home button wasn't consistently working- i tried everything i could find online for suggestions on cleaning out the button, etc. nothing worked so i know i needed a new button, but all the repair places i looked at were at least $60. for $20 i was able to switch it out myself and it works perfectly!

My Fix

took a long time for me to get all the little screws in and out- switching out the actual button was probably the easiest part of the whole thing!

My Advice

definitely make sure that you have the right size screwdriver for the interior screws. I tried to make due with what i had at home (so close, barely a size too big) and it took twice as long (and probably stripped the screw a bit too).

My Problem

home button fell off the iPhone

My Fix

It took about an hour and the phone is now like new.

My Advice

Be very careful with the 5 extremely small screws.

It might be simpler to not unscrew the 3 screws on the bottom part and not to separate the top part of the iPhone from the bottom. The top part could be placed face down and then secure the bottom part at about 75 degrees vertically. Then you would need to only remove the two very small screws securing the button and ribbon.

My Problem

The battery was going out on the phone. 100%..78%..20%.. Dead. All in a matter of minutes. Then the home button snapped in two. The poor little iphone 5 was in bad shape. Still had several months until the contract let me get a new phone. It was either fix it, or buy a temporary phone.

My Fix

After reading some of the experiences of people breaking the screen. I was prepared, and even bought a cheap phone, just in case I ruined it. Getting the screen off was a bit tricky, but I was extra careful. After getting the screen off, it was simple. I had the home button and battery replaced in less than five minutes. I was a bit worried about the quality of the parts at first, but the battery seems to last longer than when I first bought it, and the home button feels great.

My Advice

My advice to anyone doing this, is take your time opening the phone. Instead of pulling straight up, target a corner. It's easier to get a corner up and start ther with the prying. It honestly doesn't take as much force as you think. Just take it slow, and you'll be fine.

My Problem

The iPhone 5 that I've had for about a year and a half started turning off at about 20-40% remaining charge.

My Fix

Went smoothly for the most part. Removing the battery with the adhesive was tough. Just keep at it in a way that isn't stressing the phone too much.

My Advice

Be patient with the battery removal. The adhesive could be strong. It'll give eventually. Use both the battery removal tab and pry. It all goes to loosening the adhesive.

My Problem

Faulty home button or ribbon cable

My Fix

I have been using my iPhone with a faulty home button or ribbon cable for so long I can't remember. It came to the point a month ago where the button didn't work at all. So I had to assign the optional assistive touch button to access or close apps and that drove me insane. Enough is enough I finally threw in the towel and got online to see if there was a fix and sure enough iFixit popped up. I thought why the !&&* not. The video and step by step guide seemed simple enough and they even had the right tools. So I placed my order which arrived within a week. Not too bad. Following the video and step by step guide as I thought was easy enough and though the screws were so tiny having the right tools for the job made things quite easy. The only thing I think I did wrong was apply to much force when lifting the front panel off the backing case with the suction cup which came right off without needing to pry the two apart with the tools. Luckily I didn't damage anything. I replaced both the ribbon cable and the button as I wasn't sure which was faulty. Putting things back was fairly simple as well and my phone powered up without any issues. Freakin awesome. Thank you iFixit I am so happy.

My Advice

My advice is don't wait too long to fix your device. I had to use the assistive touch button for so long that now even though with the new home button in place, out of habit I still look for that damned assistive touch button.

My Problem

So a while back, I cracked my iPhone 5 screen. So I entrusted my dad with buying a new digitizer and home button (cause that wasn't functioning properly either). His fix went well. Screen was good, but the home button was some crappy knock-off from eBay or something and I had to press extra extra extra hard for it to actually work.

Over time, my rear camera wouldn't focus properly and had gotten scratches on it (probably from dropping it numerous times prior to receiving my case). But that didn't bug me much. I could make it work by hitting it a couple times. But more recently, my battery has been going insane. It would go from 80% to 30% in a few minutes, then it would die at 35% but I could still turn it back on and it would say 40%. That's what really drove me to get everything fixed.

So I went ahead and bought the rear camera, battery, home button, plus the necessary tools and just decided to do it myself this time around. No more "dad" to do it this time.

My Fix

Opening up the phone with the suction cup was pretty hard, but once you got those clips off, it wasn't such a big deal. Everything was pretty smooth sailing until I had to remove one of the front panel cable assembly brackets. I kinda lost one of the screws. Oops. No big deal though. I just used the two remaining out of the 3 to put it back on.

The battery was a serious pain the butt to remove. I practically bent that thing in half trying to pry it off the phone. I also kind of punctured it a couple times trying to use the opening tool. Thank god I was getting rid of it anyways.

After removing the logic board from the phone, it wasn't difficult to remove the camera and reattach the new one. But what sucked was trying to put it back and getting that flash twisted in the right way and getting it to stay. After wrestling it for a while, I finally held it in place long enough to screw back in one of the panels holding it in place.

Putting everything back together isn't nearly as difficult as taking it apart. So with the new battery and camera in place, all I had left to do was the home button. Of course this was a piece of cake. Removing the old one and sticking on the new one took like 2 minutes and bam! All done. Of course, it couldn't be that easy. It was a little crooked at first. So I had to go back in and fix it to where it was perfectly straight. OCD.

I had literally just got off an 9 hour shift at work and it was close to 1am when I did this fix. I was half awake and running on McDonald's sweet tea to drive me to finish it. But I was going on a trip to Dallas in the morning and I couldn't stand not fixing it now. Luckily though, it only took me and hour and a half. And it was so so SO satisfying in the end. Not bad for a first try.

My Advice

Patience. Take your time. Getting the battery out is what took the most time. It's attached by LOTS of adhesive glue, so don't be afraid to go at it but it might just be better to get a replacement battery anyway (incase you mess up the original...like I did.)

Figure out a way to separate and keep track of all the screws beforehand. It wasn't till halfway through my fix that I finally found a sufficient way to label and keep my screws on hand. F

inally, trust yourself. It can be scary to go into it with the thought of messing up, but just go for it. Don't let fear hold you back. Just find a balance between finesse and boldness and you should be good to go.

And this is coming from an 18 year old girl, with no prior experience to anything. Ever. I'm sure you got this.

My Problem

Power button wasn't working. I just replaced the home button because I thought it would look cool and the phone would already be open so I thought, what the heck, why not.

My Fix

It works better now. Still a couple clicks to get it working but that may also be my cases' fault. The process was pretty difficult and time consuming. The Phillips driver that was sent was so hard to use on the tiny screws inside the phone. I had to use a pocket knife to get most of them. And some screws alone took 10+ minutes to get out. It was pretty stressful but after I got all the screws out, the process and steps were easy to follow.

My Advice

Look for a better Phillips screw driver. A smaller one than the one on this site. And use the YouTube video and written steps. But be careful because they don't take out the screws in the same order. Do it on white paper. Or on a white poster board. Use double sided tape. Place the screws on the tape and label above the tape where you got them from. Or an even better idea if you have any artistic ability. Make a enlarged sketch of the opened phone and place the screws around were you took them from.