Sony Xperia Z3
Sony Xperia Z3 Charge Port
Replace the Micro-B USB port. This part requires microsoldering.
Sony Xperia Z3 and Z3 Dual LCD Screen and Digitizer
The display assembly includes the front glass digitizer screen and LCD display for the Xperia Z3 and Z3 Dual.
Sony Xperia Z3 and Z3 Dual Back Cover Adhesive
This custom cut adhesive film secures the rear cover panel of the Sony Xperia Z3 or Z3 Dual smartphone.
Sony Xperia Z3 LCD Screen and Digitizer Full Assembly
The display assembly includes the front glass digitizer screen, LCD display, front plastic frame, and side bezel for the Xperia Z3.
Sony Xperia Z3 SIM Card Tray
Replace the plastic SIM card tray.
Sony Xperia Z3 NFC Antenna
Replace the near field communication antenna.
Sony Xperia Z3 and Z3 Dual Access Covers
Replace the two side access covers.
Sony Xperia Z/Z1/Z2/Z3 Vibrator
Replace the vibration motor.
Sony Xperia Z3 Microphone
Replace one of two microphones on the headphone jack assembly and the side button cable assembly. Replacing a microphone requires microsoldering.
Sony Xperia Z3 Speaker Assembly
Replace the speaker and its plastic enclosure.
The Sony Xperia Z3 was launched in late 2014 as a replacement for the Xperia Z2. Slightly slimmer and with a higher IP rating for dust and water resistance than the Z2, this model features 1080p display with Sony's "Triluminos" technology, a 2.5 GHz quad-core Qualcomm Snapdragon 801 system-on-chip with 3 GB of RAM, and a 20.7 megapixel rear-facing camera.