Samsung Galaxy S7 Edge AT&T (G935A)
Galaxy S7/S7 Edge Rear Camera Bezel & Lens Cover
Replace the metal bezel and lens cover for the rear-facing camera of a Samsung Galaxy S7 or S7 Edge.
Galaxy S7 Edge LCD Screen and Digitizer Assembly (AT&T)
Replace a scratched or malfunctioning display assembly including the front glass digitizer screen, AMOLED display, front frame, and charger board for an AT&T (G935A) mode...
Galaxy S7 Edge Rear Cover Adhesive
This custom cut adhesive film secures the rear cover panel to the back of the Samsung Galaxy S7 Edge.
Galaxy S7 Edge Antenna Cables
Replace the three antenna cables connected to the motherboard.
Galaxy S7 Edge Touch Screen Adhesive
This custom cut adhesive film set secures the front glass digitizer screen to the midframe assembly of the Samsung Galaxy S7 Edge.
Galaxy S7 Edge LCD Screen and Digitizer
Replace the front glass digitizer screen and LCD for the Samsung Galaxy S7 Edge.
Galaxy S7 Edge SIM and SD Card Tray
Replace the tray that holds the SIM and SD cards.
Galaxy S7 Edge Battery Adhesive Strips
Use these custom adhesive strips to secure a Galaxy S7 Edge battery to the midframe.
Galaxy S7 Edge Charging Daughter Board (AT&T)
Replace the daughter board that includes the USB port, primary microphone, and menu button touch sensors for an AT&T model Samsung Galaxy S7 Edge.
Galaxy S7 Edge Headphone Jack
Replace the headphone jack for the Samsung Galaxy S7 Edge.
Announced on February 21, 2016 at Samsung's Mobile World Congress and released in March of the same year, the Galaxy S7 Edge is Samsung's 2016 revision to the original curved-screen S6 Edge. It was released as the premium alternative to the Galaxy S7. Notable upgrades from last year's model include the Qualcomm Snapdragon 820, 4 GB of LPDDR RAM, and a microSD card slot for memory expansion up to 200 GB. The Galaxy S7 Edge can be identified by its top-loading combination SIM and microSD tray, and its model number, SM-G935, printed on the back glass.