Phillips #000 Screwdriver

$5.95

Product code: IF145-030-3

Click Image To Zoom

 
 
 
 

Phillips #000 Screwdriver

$5.95

Product code: IF145-030-3

Product Overview

A very small screwdriver, for very small screws

  • Don't be fooled! Many screwdrivers are incorrectly marked as #000, but are too large to unscrew the teensie and delicate #000 screws.
  • High quality steel shaft and hand-tested tip ensure a quality drive, every time.

This size bit is also available as an exchangeable bit in our popular 54 Bit Driver Kit , carefully designed to include the most common and often hard to find driver bits used in electronics repair. This driver is also a part of the Pro Tech Screwdriver Set.

Product Details

  $5.95 iFixit

 
 

Condition:

New

Warranty:

One year warranty

50+ Available

Add to Cart
 

Stories

My Problem

Screen has lines running on it, tells me the connection of the display module has problem

My Fix

Perfect, iSlack is useful but still need help

My Advice

Its very tight for iSlack to open in first trial, you need to still use the suction cup a bit, but be careful not to be too 'excited' on the opening process, once it shows movement, switch back to iSlack to prevent killing your precious Touch ID

My Problem

Realized the back glass was broken, don't know how it happened, but it was. So I looked up what to do and found your site. Then I decided to also replace the dock connector because I when I used my phone I had to put the other person on speaker or they couldn't hear me. The sweet girl at the Apple store had told me the only solution was to replace the phone with the latest $$$ model.

My Fix

Replacing the back class was easy, although one of the screws was striped. I sent a question in, but then I found three solutions and between the three, I finally got that li'l bugger screw out. so while I had it open I went for it and followed the guide to replacing the dock connector. I had trouble understanding what part was what:

the battery

battery connector from the socket (what socket)

loudspeaker enclosure

pressure contact

speaker enclosure assembly

home button ribbon cable ZIF socket.

And that is where I got into trouble. Those ribbon cables and how to put them out of the way while I'm working. Was worried as to how delicate they were so apparently I didn't move the home button ribbon far enough out of the way and as soon as I moved the dock connector, the home button ribbon tore. So now I have placed my order for that.

My Advice

All in all it was a good experience. I am having to wait on the home button ribbon part, but I was able to do something I believed was difficult. Your instructions made it easy.

My suggestions:

1. maybe a picture with part names just for us idiots. the warning on working with the small parts such as ribbons; how far to pull out of the way or not pull. A picture of that small part.

2. instructions just say: To reassemble your device, follow these instructions in reverse order....well that's not necessarily true.

A. The new part doesn't have a retaining flap on the home button ribbon cable ZIF socket.

B. There are parts that have protective plastic covering (on the dock connector part and the back glass as well). Some of us may not realize where they all are and some may not even realize it needs to be removed.

Suggestion to an inexperienced person attempting the dock connector replacement or anything in that area of the phone: Before each step, check the step comment icon at the top right of each step. They will give you a heads up on problems and solutions before you make a mistake.

My Problem

My phone was having trouble charging. Had to hold cable "just right".

My Fix

Everything went well with the repair and my phone was fully functional afterwards. However the next day my touch ID stopped working and I haven't been able to figure out why. Not sure if it is related to the repair. Anyway, my phone now charges correctly.

My Advice

Take it slow. Make sure you have something to hold the screws and small parts with. I used a piece of packing tape attached to a paper plate.

My Problem

I fixed the home button speaker disclosure wifi antenna cellular antenna vibrator.

My Fix

Was pretty easy not to bad on time just not so steady hands Why I took awhile but got it done.

My Advice

No advice

My Problem

Home button stuck.

My Fix

It was easy with your tools and video.

My Advice

Follow the video!

My Problem

Power button and volume Up stopped working. Figured I would repair phone and keep as a spare.

My Fix

The repair was a little more involved than I thought but interesting to see how it all goes together. Followed the instructions provided on the website. Tip: I used my gopro dash mount suction cup to remove the display.

My Advice

If you are comfortable working with computers or crafts you can do this task. For this particular swap it took me about an hour. Make sure you get the correct tools.

My Problem

The home button on my iPhone 5 fell off and could not use the phone anymore.

My Fix

It went very well. I bought the button and the tools from your site and I used the excellent video that you guys made. I followed it to the letter and had no issues, it took me set by step until the job was completed. I was done in less than 30 minutes.

I did not have the heat pad so I used a blow dryer to help loosen up the button cable very carefully which I would not recommend doing. But, if you have no choice set it to the lowest level of heat and air speed and keep it away from the tiny screws. I was done in about 30 minutes.

My Advice

Get the tools for the job because it will make your job go without a hitch and do not deviate from the video instructions.

guentzel's Story Photo #516800
guentzel's Story Photo #516798

My Problem

Battery was weak. The iPhone 5 often showed +50% battery status - then, all of a sudden, the OS shut down.

My Fix

I followed the very good instruction from the fixit-website (https://www.ifixit.com/Guide/iPhone+5+Ba...). The instruction said when removing the display you should pry with the plastic opening tool around the display to loosen the display (steps 6-8). This didn't work with me. I couldn't lift the display high enough to get the opening tool between display and body. But when I finally managed to lift it at the bottom (where the screws were), it came off altogether. Luckily, I didn't pull too hard so I didn't damage the wires.

Another thing was the front panel assembly cable bracket (step 10), see photo. It has curved metal tongues that grab somewhere under the cables. It came off very hard - and it was hard to put it back. I first tried to somehow move the tongues where I thought they should go, but to no avail. Finally, I pressed it tightly down, and the tongues snapped in place. I needed quite a lot of pressure until the tongues "clicked".

My Advice

I had difficulties handling the tiny Phillips screws. Tweezers did the trick.

My Problem

I can't believe it took me until this year to realize I could replace the HDD in my MBP with a SSD. Read up on it to make sure it would work, ordered a drive from elsewhere and used these tools and the teardown guides on iFixIt.

My Fix

Total success - like having a brand new computer!

My Advice

Everything went smoothly. The whole operation took less than 10 minutes.

My Problem

Was having intermittent charge and sync issues with My 4S Doc Connector.

My Fix

Repair was easy with the pictorial repair guide from the website. 1 hour or so is all it took. This was my first repair for this phone.

My Advice

Lay out and tape a big piece of white paper (24" x 24" )to a flat work surface. The tape is so you don't have to worry about catching the paper and shifting all the little screws around by accident. As you take the parts out write on the paper size Ie 1.2mm Phillips etc. and description of part. There is plenty of room to keep the parts separated to help ease any confusion of similar looking screws.