Heat Gun

$24.95

Product code: IF145-031-1

Click Image To Zoom

 
 
 
 

Heat Gun

$24.95

Product code: IF145-031-1

Product Overview

Great for reflowing solder and melting adhesive.

  • The power of fire in the palm of your hand (except for the part where flames actually come out).
  • 1500W Heat Gun needed for many different repair processes.
  • Can be used to loosen adhesive holding device components in place, or to reflow solder to repair soldered connections.
  • High and Low Heat settings.
  • Low setting reaches 570 degrees F high setting reaches 1112 degrees F.
  • The high setting can ignite things. It can also burn you. So watch out!

Product Details

  $24.95

 
 

US Only:

This product only ships to US addresses

Condition:

New

Warranty:

One year warranty

Notes:

Heat guns may produce residual smoke when turned off the first few times and should always be used in a well-ventilated area.

9 Available

Add to Cart
 

Stories

My Problem

I fixed it because it ha front and back screen broken.

My Fix

The repair went great it's fixed.

My Advice

None i did it on my own.

My Problem

The screen shows only snow.

My Fix

The iFixIt repair components worked fantastically! I was able to use the heat gun to melt the adhesive holding the touch pad digitizer to the iPad frame. i used: the set of picks to help separate the digitizer from the frame without damaging the plastic ring around the case; I the screwdrivers to remove the LCD; the plastic pry tools to open the LCD ribbon cable connector; the tweezers to reseat the ribbon cable; the replacement adhesive to reassemble the unit. The iFixIt tools and supplies were perfect! They worked as advertised and made the daunting task of opening a seemingly impenetrable iPad easy (I really mean easy). Unhappily, the problem was not a poorly seated ribbon cable. my iPad unfortunately seems to have other problems. Likely a failed integrated circuit.

My Advice

It's worth opening these iPads 'just in case' there is something 'dumb' that can be fixed, like a cable that has become loose due to dropping the iPad or jostling it in carry on luggage. Mine has seen about 300,000 frequent flier miles in 2 years, so maybe it did as well as can be expected. Although having it fail 8 days after the warranty and AppleCare expired was not pleasant. The iFixIt videos and tools are an absolute MUST of opening (and closing) these sealed products. Opening my iPad went so smoothly that you CANNOT tell it was opened: no scratches, bent plastic ring, cracked glass, etc. One idea is that you should always wear gloves so you don't leave fingerprints, and you should have some canned air handy to clean particles off the LCD and back of the digitizer. Sometimes even with the best effort, something cannot be effectively repaired as in my case. But, it was worth a try.

My Problem

Screen is cracked.

My Fix

Haven't do the repair yet.

My Advice

Don't drop your laptop.

My Problem

Replacing the broken glass on my samsung galaxy s4. I used the heat gun and believe I put it too close to the screen. Thus, discoloring the screen and forcing me to buy a $100 new screen/digitizer/lcd.

My Fix

Using the heat gun for the recommended time, I still managed to discolor my phone screen because the gun was too close to the device. I was happy because I managed to finally have a utility to caramelize the sugar on top of the Crème brûlée.

My Advice

Do not use the heat gun too close to the device. Use low heat, don't overheat, maintain a good 5 inch distance above the device.

My Problem

i fixed it because i believe that broken down video game systems dont belong at e-waste center's and i believe that people that have broken systems shouldnt throw them away but learn themselves to fix them, like i have

My Fix

it was quick and easy to fix and it didnt take too much time and the repair guide really made it faster and easier for me to do my duty to my video game life and my video game code and to get one step closer to accomplishing my pledge to ifixit.com

My Advice

take your time and read very carefully and dont get frustrated. if you do get angry or upset just take a break and take deep breathes wait a couple of minuets and then resume your work

My Problem

XBox 360 was not working because of red ring of death.

My Fix

Followed IFixit instructions with recommended heat flow gun and IFixit red ring of death kit and was able to fix the problem in around 4 hours. If I had to do it again it may only take me an hour or so now that I'm more familiar with the process.

My Advice

Buy the ArticClean Thermal Material Remover and Thermal surface Purifier as this came in handy when cleaning the chips and heat sinks.

My Problem

Found an xbox someone had put on the trash on moving day. Turned it on and of course it had the ROOD.

My Fix

Pretty smooth. Follow the guides on this site and you will be in good hands. Just take your time and have a good working space.

My Advice

The most difficult and tedious part was definitely cleaning the old thermal paste off the CPU/GPU. Use 91% IPA lots of cloth and TAKE YOUR TIME. That part alone took 30-45 minutes.

My Problem

I fix my Xbox 360 in order to save money if I can and I didn't want to recycle it unless there was a way to fix it.

My Fix

It was little difficult to fix the problem but it help me get the Xbox 360 working again.

My Advice

Just relax while repairing your console and take one step at a time and don't rush it.

My Problem

I own a small computer repair shop and business is a little slow these days. I'm always looking for ways to bring in more revenue and when an opportunity comes up I usually jumped on it.

My wife saw a post in FaceBook from one of her friends that asked if anybody knew where to get a shattered screen replaced on an iPod. There were, of course, several replies telling her where to take it and what it would cost. My wife asked if I would be interested. I did a quick Google search which brought me to ifixit.com. A general search on the site took me right to an overview of the repair and the general cost of a replacement screen. I immediately knew it was something I could do, so I told my wife to reply back and give the person a quote $40 below the highest shown in the replies and have her give me a call if she was interested. She called within half an hour.

While I was on the phone with the customer, I was going through the ifixit website. Based on the information I was learning from the site, I was able to explain to the customer how to get the model number from her iPod and when she gave me that, I immediately found the replacement screen. I was literally learning on the fly, searching the site, answering her questions and sounding like I've been doing this for years. I ended the call and prepared to finish the order. Going through the instructions, I found out I needed a heat gun and special tools to disassemble the iPod. In the end, I was relieved when I figured out I wouldn't be losing any money on this deal.

So, I ordered the iPod Touch screen, a heat gun, and the tools needed to make the repair. The price I quoted the customer covered the cost of the parts, tools, and shipping with $20 left over. I guess I get to keep the tools and my wife gets the 20 bucks. Anyway, now I just had to hope that I can do the repair when the part comes in.

My Fix

The repair went great! The ifixit.com instructions were perfect and very precise.

The iPod screen was shattered on the bottom left side corner next to the Home button. That actually made it a little easier to get started with the disassembly since it gave me a small opening to pry on. The first few steps went without a hitch. However, to my dismay, in step five I learned that I didn't have the right size screwdrivers. I had the same micro driver set for years and very rarely did I ever use the 2 smallest drivers. At this point it was too late in the evening to go out and purchase a set and I was too impatient to wait until the next day. So I improvised by fashioning some flat tip screwdrivers from exacto knife blades. I ground the tips to fit snuggly in the screw slots. These were a little awkward to use, but it got the job done. I won't do it that way again . . .

I followed the rest of the procedures and had the iPod back together in a little over an hour. That does not include the time it took for fabricating the screwdrivers and uh, looking for a screw that fell on the floor (that alone blew 45 minutes).

This wasn't part of the procedures and I'm not sure how dangerous for the iPod it was, but before applying the glue, I put everything together and fired up the device to make sure everything worked. It did just fine!

To my surprise, reapplying the glue wasn't as difficult as I thought it would be. Using a razor blade, I cut to glue strips apart and lined them up the way they would go into the iPod. Using small tweezers and an exacto knife I put the small strips in place and used my smallest (too big) micro flat tip screwdriver to press the adhesive into the appropriate areas. I let it sit for a while before pulling the backing off.

After making a last check, I lined up the screen and pushed it down and it fell right in place. I was very excited that it fit perfectly and looked like the original screen all the way around the edges. After that, a final test to determine that everything worked and I was done!

The customer was very happy and I'm sure she'll recommend me to others. I know for sure that she updated status in FaceBook about getting her iPod fixed at a really good price.

My Advice

Don't over estimate your tools. I thought I had everything I needed but my smallest micro-screwdriver was too big for the job.

A small low-strength magnet will help hold small screws while you're working on the device.

My Problem

I just needed to fix an auxiliary cable that had been cut the helping hands were perfect for holding the wires where I needed them while soldering the splice.

My Fix

Process went great, took about ten minutes total and was very easy.

My Advice

I recommend having plenty of space between your solder points and the helping hands grips as bringing the grips too close together makes it difficult to properly solder the wires in the splice.