My Problem

Old Macbook didn't have enough RAM (1GB) to quickly access the the Internet and process applications.

My Fix

VERY EASY - The new RAM (2GB Total) arrived on-time and was quick to install following the IFIXIT instructions with pics. Took me less than 15 minutes!

My Advice

My tips are:

1. Make sure when you remove the existing two 512KB RAM boards, you note the top vs. bottom orientation so the new 1GB RAM boards are inserted in the same orientation.

2. Make sure you insert the new tow 1GB RAM boards very firmly.

3. Once everything put back together you can check to see the new total 2GB RAM is seen by starting up your Macbook and using the "About this Mac" option under the lefthand apple icon.

My Problem

My Macbook only had 1GB of Memory which was slowing down Internet and processing speed and IFIXIT had such a GREAT price for adding an additional 1GB and provided easy instructions with pictures for me to DIY.

My Fix

It was very straightforward with easy instructions and pictures. It was also beneficial to read other users tips.

My DIY repair went very quickly (< 15 minutes).

My Advice

If you need to do this yourself my only additional tips are:

1. Make sure when you pull out the existing memory boards that you pay attention to the orientation of the memory boards top vs. bottom.

2. Remove both 512KB memory boards and insert each of the new 1GB memory boards in each of the now two empty slots.

3. Make sure you seat the new 1GB memory boards in the correct orientation and very firmly (push in very firmly).

4. Once everything is completed, start your Macbook and review your new configuration via "About this Mac" to ensure your new 2GB of Memory is shown.

My Problem

The problem: I wanted to upgrade from 1GB of RAM to 2GB.

I purchased my MacBook1,1 in 2006, with 1 GB of RAM. The most recent OS installed was 10.2. That OS is pretty behind the times; it doesn't recognize my iPhone, and none of my browsers can be considered secure any more. It was time to upgrade the OS, and for an optimal experience, I figured it was time to max out the RAM as well.

My Fix

Taking out the battery/unscrewing the L-shaped frame was pretty easy (I used a jewelry screwdriver). Removing the old RAM was a snap as well. Getting the new RAM in there was difficult. You really, really have to force it in there! It took about an hour for me to figure out that I just needed to be rough with it. My fingers were so sore from pushing on it that I put a pad of post-its between the RAM and my fingers. Finally I felt the RAM slip into the slot. Finally. After that, it was all systems go!

My Advice

It requires brute force to push the RAM into the slots. Keep pushing. It's also worth noting that when you put the L-shaped frame thing back on, you should use the screwdriver or something else small and flat to kind of slip the padding underneath the frame as you put it back into place. Otherwise your battery won't quite fit.

My Problem

No enough default RAM (512MB only).

My Fix

Very well.

My Advice

No.

My Problem

1GB -> 2GB Upgrade

My Fix

Repair went well. Very Easy following iFixit directions

My Advice

Having and using the correct tools makes the job go smoothly.

My Problem

Simply to slow

My Fix

It went just fine!

My Advice

I used the guide

My Problem

My 2006 Mac mini was still running tiger os 10.4.11. Unable to use many newer applications, update web browser, sign up for nest account for my newly installed nest, etc because computer was too slow. Also it would stall out constantly, freeze up and quit unexpectedly. Needed more memory and new OS. Local repair guy recommended I just buy a new computer.

My Fix

Overall went very well. Taking the cover off was still difficult even with the isesamo. Actually ended up bending the isesamo badly in order to pop the case off. But once it was off there was no problem detaching and unscrewing things. RAM came out and installed easily enough. Putting things back together was a little trickier. Reinserting the thermal sensor cable was a little difficult but I finally got it. Three of the four screws that came out went back in easily but I was unable to get the 4th in and get it to "grab" anything. After several attempts I finally gave up. It seems to be fine with the 3 screws. I'm hanging onto the 4th to try again later. Afterwards I installed snow leopard and that also went well. Computer seems to be running much smoother now. No problems have been detected so far.

My Advice

I had been too scared to attempt opening my mac and trying to repair myself fearing I would break it or make it worse. Now I'm glad I saved my money and upgraded myself because it wasn't as difficult as I thought.

My Problem

to little rams to upgrade the computer to OS-X lion

My Fix

Installing a new 2 GB RAM chip i addition to the existing 1 GB RAM chip using the guide went smooth, to the MacBook Pro 15 model 1211

My Advice

read about possibilities for upgrading.

Follow the instruction

My Problem

The Mac Mini needed more RAM.

My Fix

It was touch and go, but I used my old rusty putty knife to get the mini open and install the RAM. Using the repair guides I followed the procedure step by step. When I powered it back on, I was amazed to see 2 GB functional!

My Advice

This procedure is not for the electronically uninitiated. But I felt if the girl in the video can do it, so could I!

My Problem

Dead hard drive on older macbook 2.1. Tired of putting dead computer equipment in storage until next recycling effort. Decided to spend a little money and see if I could repair/upgrade laptop.

My Fix

Perfecto. Installed a new SSD drive I already had (sorry next time buying it at ifixit). Then bought new hard drive cable (macbook didn't recognize new hard drive) and added RAM. Used all the how-to resources on ifixit website. Miraculously, everything worked and the macbook is extremely fast and working perfectly. The ifixit guides were very accurate and helpful.

My Advice

Not sure if this is good advice or not. Before doing install of new hard drive, connect it to macbook as an external drive first to see if the laptop recognizes it. If it doesn't, may need a new cable as I did. BTW, I had removed old hard drive and had my work IT guy confirm that it was dead.