MacBook Pro 17" Unibody
Choose your model of MacBook Pro 17" Unibody:
MacBook and MacBook Pro Unibody Plastic Feet
Replace the black plastic feet on the lower case of your Unibody MacBook or MacBook Pro.
MacBook Pro 17" Unibody Hard Drive Bracket
This bracket secures the hard drive to the lower case.
G4/MagSafe AC Adapter End
2-pronged tip of square G4 or MagSafe adapter
Arctic Silver ArctiClean
Two part thermal paste remover. Two part cleaner used to dissolve thermal paste and purify the surfaces of heat sinks and processors before applying new thermal paste. In...
Arctic Silver Thermal Paste
3.5 gram Arctic Silver thermal paste tube. Thermal paste forms a continuous, conductive layer between a processor and its heat sink, improving cooling performance and kee...
Apple AC Adapter (3-prong) Extension Cable
Get away from the outlet with this extension to your Apple AC adapter's reach.
PC3-8500 1 GB RAM Chip
RAM Upgrade / 1 GB / PC3-8500 / Low Profile / 204 pin, 1066 MHz
Silicone 2.5" Hard Drive Enclosure with USB 2.0 Cable
External silicone hard drive enclosure for SATA laptop drives
MacBook and MacBook Pro Remote
Control your computer from across the room
MacBook Pro 17" Unibody (Early/Mid 2009) Microphone
This part includes the microphone and its cable.
Apple released the MacBook Pro Unibody 17" with a new aluminum case drilled from a single aluminum brick. A massive internal battery boasts exceptional battery life. All 17" Unibody models feature 2 graphics cards (one for power saving casual use and one for graphics-intensive processing).
All models have two RAM slots for an easy upgrade with PC3-8500 or PC3-10600 RAM chips (depending on the model). Any 9.5mm SATA hard drive will work in these notebooks, including the fast and massive 500 GB 7200RPM SATA hard drive.
Select your model above for compatible parts. Not sure what you have? Check out our ID your Mac page for the right path.