MacBook Pro 15" Unibody Early 2011
240 GB OCZ TL100 SSD
SATA interface for Intel Macs / 69.85mm wide 7mm tall / 240 GB Unformatted / Solid State Drive
480 GB OCZ TR150 SSD
SATA interface for Intel Macs / 69.85mm wide 7mm tall / 480 GB Unformatted / Solid State Drive
120 GB OCZ TL100 SSD
SATA interface for Intel Macs / 69.85mm wide 7mm tall / 120 GB Unformatted / Solid State Drive
960 GB OCZ SSD
SATA interface for Intel Macs / 69.85mm wide 7mm tall / 960 GB Unformatted / Solid State Drive
MacBook Pro Unibody (Mid 2009 through Mid 2012) Trackpad Mounting Screws
Replacement screws and springs for mounting the trackpad in the upper case assembly of mid 2009 through mid 2012, 13" and 15" MacBook Pro Unibody laptops.
MacBook and MacBook Pro Unibody Plastic Feet
Replace the black plastic feet on the lower case of your Unibody MacBook or MacBook Pro.
Macbook Pro 13" and 15" Unibody (Mid 2009 through Mid 2012) Lower Case Screw Set
This set contains just the screws for the lower case.
Silicone 2.5" Hard Drive Enclosure with USB 2.0 Cable
External silicone hard drive enclosure for SATA laptop drives
MacBook Pro 15" Unibody (Early 2011 through Mid 2012) Replacement Battery
Replacement battery, compatible with all Early 2011, Late 2011, and Mid 2012 15" Unibody MacBook Pros.
The Early 2011 version of MacBook Pro 15" Unibody features an upgraded graphics chip and a new quad core Core i7 processor with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.
The MBP 15" Unibody (Early 2011) is a solid laptop right out of the box, but it can be upgraded with as much as 16 GB of PC3-10600 RAM into its 2 RAM slots. The 1 TB SSD Hybrid 2.5" Hard Drive will give you plenty of storage.
Not sure what's wrong with your laptop? Check out our Troubleshooting Guide!
Select your category below or browse all compatible parts to find what you need to fix your laptop!