MacBook Pro 15" Unibody Early 2009
Parts that work with MacBook Pro 15" Unibody Early 2009:
MacBook and MacBook Pro Unibody Plastic Feet
Replace the black plastic feet on the lower case of your Unibody MacBook or MacBook Pro.
PC3-8500 2 GB RAM Chip
Replace or upgrade the RAM in your desktop or laptop computer.
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
MacBook Pro 15" Unibody (Late 2008-Early 2009) Hard Drive Bracket and IR Sensor
This cable connects the hard drive to the logic board.
G4/MagSafe AC Adapter End
Replace a broken or damaged two-pronged tip of your square G4 or MagSafe adapter with this part.
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
MacBook Pro 15" Unibody (Late 2008/Early 2009) Microphone
This assembly includes the microphone and its cable.
MacBook Pro 15" Unibody (Late 2008-Early 2009) ExpressCard Cage
Replace the ExpressCard slot on left side of a Late 2008 or Early 2009 model 15" Unibody MacBook Pro.
Apple AC Adapter (3-prong) Extension Cable
Replace a broken or damaged six foot Apple three-prong AC adapter extension cable with this part.
PC3-8500 1 GB RAM Chip
RAM Upgrade / 1 GB / PC3-8500 / Low Profile / 204 pin, 1066 MHz
A quiet processor speed bump and max RAM increase (to 8 GB) characterizes this version of MacBook Pro 15" Unibody.
The most common repairs with the Unibody Early 2009 model 15 inch MacBook Pro laptops are replacing a dead battery or upgrading the hard drive or RAM. The MBP 15" Unibody Early 2009 can use two 4 GB RAM chips for a total of 8 GB to maximize the performance of this notebook.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 15" Unibody repair guides for step-by-step instructions on how to make the fix.