MacBook Pro 15" Unibody (Late 2008 or Early 2009)
Choose your model of MacBook Pro 15" Unibody (Late 2008 or Early 2009):
MacBook and MacBook Pro Unibody Plastic Feet
Replace the black plastic feet on the lower case of your Unibody MacBook or MacBook Pro.
G4/MagSafe AC Adapter End
2-pronged tip of square G4 or MagSafe adapter
Arctic Silver ArctiClean
Two part thermal paste remover. Two part cleaner used to dissolve thermal paste and purify the surfaces of heat sinks and processors before applying new thermal paste. In...
MacBook Pro 15" Unibody (Late 2008/Early 2009) Hard Drive Bracket and IR Sensor
This cable connects the hard drive to the logic board.
Arctic Silver Thermal Paste
3.5 gram Arctic Silver thermal paste tube. Thermal paste forms a continuous, conductive layer between a processor and its heat sink, improving cooling performance and kee...
MacBook Pro 15" Unibody (Late 2008/Early 2009) Microphone
This assembly includes the microphone and its cable.
MacBook Pro 15" Unibody (Late 2008/Early 2009) ExpressCard Cage
Replace the ExpressCard slot on left side of a Late 2008 or Early 2009 model 15" Unibody MacBook Pro.
Apple AC Adapter (3-prong) Extension Cable
Get away from the outlet with this extension to your Apple AC adapter's reach.
PC3-8500 1 GB RAM Chip
RAM Upgrade / 1 GB / PC3-8500 / Low Profile / 204 pin, 1066 MHz
Silicone 2.5" Hard Drive Enclosure with USB 2.0 Cable
External silicone hard drive enclosure for SATA laptop drives
Apple released the MacBook Pro 15" Unibody in late 2008 with a new aluminum case drilled from a single aluminum brick. A quiet speed bump in early 2009 made these machines even more powerful!
These machines can be upgraded with a hefty, yet agile 500 GB 7200 RPM SATA hard drive.
Select your model above for parts and assistance!