MacBook Pro 13" Unibody Early 2011 Parts
Parts that work with MacBook Pro 13" Unibody Early 2011:
MacBook Pro 13" Unibody (Mid 2009-Mid 2012) Replacement Battery
Aftermarket replacement battery, compatible with all Mid 2009 13" Unibody MacBook Pros, all Mid 2010 13" Unibody MacBook Pros, all Early 2011 13" Unibody MacBook Pros, al...
MacBook and MacBook Pro Unibody Plastic Feet
Replace the black plastic feet on the lower case of your Unibody MacBook or MacBook Pro.
Macbook Pro Unibody Lower Case Screw Set
Replace a stripped or missing screw securing the lower case of most Unibody model MacBook Pro laptops. The excluded models are the Late 2008 and Early 2009 15" MacBook Pr...
Arctic Silver Thermal Paste
Forms a continuous, heat conductive layer between a processor and its heat sink. A new layer of thermal paste keeps your processor from overheating. 3.5 grams
Arctic Silver ArctiClean
Two part cleaner dissolves old thermal paste on heat sinks and processors. One 30 ml bottle of thermal material remover and one 30 ml bottle of thermal surface purifier.
MacBook Pro Unibody 13" and 15" MagSafe DC-In Board
Replace a damaged or malfunctioning magnetic DC power connector.
Apple MagSafe 1 AC Adapter
Replace a broken or damaged Apple MagSage 1 AC adapter with this part.
MacBook Pro 13" Unibody (Mid 2009-Mid 2012) Trackpad
Replace the trackpad in a MacBook Pro 13" Unibody. Compatible with all Mid 2009 13" Unibody MacBook Pros, all Mid 2010 13" Unibody MacBook Pros, all Early 2011 13" Unibod...
MacBook and MacBook Pro (Non-Retina) SSD Upgrade Bundle
Upgrade the storage and improve boot time and read/write speed in your MacBook and MacBook Pro (Non-Retina) with this SSD upgrade bundle.
PC3-10600 8 GB RAM Chip
Replacement or upgrade RAM chip. Specs: 8 GB / PC3-10600 / Low Profile / 204 pin, 1333 MHz. This speed upgrade will make your computer faster. Compatible with All Mid 201...
In February 2011, Apple refreshed the 13" MacBook Pro line by changing to the Intel HD Graphics 3000, increasing VRAM to 384 MB, and upgrading to Core i5 and Core i7 processors with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.
The most common repairs with the MacBook Pro 13" Unibody for Early 2011 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody (Early 2011) Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 16 GB of RAM.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Early 2011 repair guides for step-by-step instructions on how to make the fix.