MacBook Pro 13" Unibody Early 2011
Parts that work with this model:
MacBook Pro 13" Unibody (Early 2011/Late 2011) Hard Drive Cable
Fix an unrecognized drive in your MacBook. This cable connects the hard drive to the logic board. Replacement SATA cable compatible with all Early 2011 13" Unibody MacBoo...
Universal Drive Adapter
Turn your current hard drive into an external drive with this part.
MacBook Pro 13" Unibody (Early 2011/Late 2011/Mid 2012) Airport/Bluetooth Cable
This cable connects the wireless board to the logic board.
MacBook Pro 13" Unibody (Early 2011/Late 2011/Mid 2012) SATA SuperDrive Cable
This cable connects the SuperDrive to the logic board.
SATA Optical Drive USB Cable
Connect an optical drive to your computer via USB with this part.
Apple AC Adapter (3-prong) Extension Cable
Replace a broken or damaged six foot Apple three-prong AC adapter extension cable with this part.
Device Info
In February 2011, Apple refreshed the 13" MacBook Pro line by changing to the Intel HD Graphics 3000, increasing VRAM to 384 MB, and upgrading to Core i5 and Core i7 processors with PC3-10600 RAM. The Mini DisplayPort was also replaced (but still backwards compatible) with the new Thunderbolt standard allowing 10 Gbps transfer speeds in both directions.
The most common repairs with the MacBook Pro 13" Unibody for Early 2011 are replacing a dead battery or upgrading the hard drive or RAM. The MacBook Pro 13" Unibody Early 2011 Memory Maxxer RAM Upgrade Kit includes all the parts and tools you need to upgrade to 16 GB of RAM.
The MacBook Pro 13" Unibody for Early 2011 requires a Tri-point Y0 Screwdriver to remove the battery. The battery kit includes all the needed tools.
Once you've bought your parts and tools, check out iFixit's MacBook Pro 13" Unibody for Early 2011 repair guides for step-by-step instructions on how to make the fix.