iPhone 6 won't start, absorption stuck on 0.06mA
Hi guys, i've a phone that had a liquid contact and won't start. I've done a quick wash to take off all the oxide. When i plug the bench power supply absorption is 0. When i try to power on it goes stucked to 0.06mA.
I checked principal voltages lines under Nand and cpu/gpu, and it's all ok, only pp_gpu is 0 but is fine because i have not plugged the screen.
I try to change tristar because PP3V3_ACC was 0 but nothing change.
I also see that RESET_1V8_L is every time 0
What also can i do?
Thanks a lot :)