MacBook Pro 15" (Model A1260) Display Assembly

$149.95

Product code: IF185-104
Apple Part #: 661-4609, 661-4610

Click Image To Zoom

 
 

MacBook Pro 15" (Model A1260) Display Assembly

$149.95

Product code: IF185-104
Apple Part #: 661-4609, 661-4610

Product Overview

See clearly again with a new Display Assembly!

Way back when, a computer screen, not unlike the first magic carpet, was simply a large sheet of paper with text that read, "use your imagination." Behold the modern spectacle with our MacBook Pro 15" (model A1260) display assembly.

Environmentally-friendly LED display. If only your LCD is cracked, you can replace just the LCD panel.

Compatibility

Identify your Mac

  • 2.4, 2.5 or 2.6 GHz (Model A1260) 15" MacBook Pros

Product Details

  • Size: 15.4"
  • Resolution: 1440x900

$149.95 Glossy / A-Stock

 
 
 

Condition:

Used, fully tested

Notes:

Glossy finish screen. Screen and casing in excellent condition.

$119.95 Glossy / B-Stock

 
 
 

Condition:

Used, fully tested

Notes:

Glossy finish screen. This item is used and will have keyboard marks and/or minor scratches on the casing.

$149.95 Matte / A-Stock

 
 
 

Condition:

Used, fully tested

Notes:

Matte finish screen. Screen and casing in excellent condition.

$119.95 Matte / B-Stock

 
 
 

Condition:

Used, fully tested

Notes:

Matte finish screen. This item is used and will have keyboard marks and/or minor scratches on the casing.

 

Compatibility

MacBook Pro 15" Core 2 Duo Models A1226 and A1260
2.4 GHz (Penryn)
2.5 GHz (Penryn)
2.6 GHz (Penryn)
 

Stories

My Problem

I've already known how to substitute a mac book pro's display due an older problem with my iSight.

My Fix

The repair went pretty good, I didn't get any kind of problem.

My Advice

be careful while doing this operation.

Susan's Story Photo #369372
Susan's Story Photo #369377
Susan's Story Photo #369378

My Problem

My Macbook Pro is early 2008. Right side of screen started striping, then eventually went black. Apple wanted $600 and time to find the part. I found it on ifixit for $150. I elected to get the display AND housing, rather than take apart the display housing and pull out the display screen (soldering, etc). It was $45 more. If you are an expert, you don't need the housing, too.

My Fix

It took about 30 minutes max. I've replaced my hard drive and superdrive, so I knew how to get in there, but I watched a video and read the ifixit manual.

My Advice

Get an ice cube tray to organize your screws. Makes it a lot easier. Pay attention to the small wires on the left: blue, gray and black.