Tools

No tools required.

Parts

No parts required.

  1. Open the latch of the accumulator on the left side. Open the battery latch on the right side. Remove the accumulator by simultaneously holding the right-hand latch open.
    • Open the latch of the accumulator on the left side.

    • Open the battery latch on the right side.

    • Remove the accumulator by simultaneously holding the right-hand latch open.

  2. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  3. Use the Philips screwdriver to remove the two screws at the bottom of the cover. Lift the cover at the bottom right with the iFixit Opening Tool Lift the cover at the bottom left with the iFixit Opening Tool
    • Use the Philips screwdriver to remove the two screws at the bottom of the cover.

    • Lift the cover at the bottom right with the iFixit Opening Tool

    • Lift the cover at the bottom left with the iFixit Opening Tool

    • Finally, remove the cover to gain access to the most important components.

  4. Locate the HDD disk. Lift the plastic tab and pull the HDD hard drive out of its SATA connector.
    • Locate the HDD disk.

    • Lift the plastic tab and pull the HDD hard drive out of its SATA connector.

Conclusion

Repeat the steps in reverse order to reassemble your device.

Special thanks to these translators:

100%

These translators are helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/2013

14,580 Reputation

150 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 68