1. Start by unlocking the right locking latch. Then, by simultaneously unlocking the left latch, lift the battery out of its socket.
    • Start by unlocking the right locking latch.

    • Then, by simultaneously unlocking the left latch, lift the battery out of its socket.

  2. Begin by spotting the dummy memory card. Then, remove it and put it on your workplan.
    • Begin by spotting the dummy memory card.

    • Then, remove it and put it on your workplan.

  3. Free shipping on all orders over $100 or containing a Pro Tech Toolkit!

    Browse Our Store
  4. Locate the 15 screws that hold the bottom cover of the device in place. Unscrew them and place them on your work surface. Then, un-clip the bottom cover, starting with the side shown in the third picture.
    • Locate the 15 screws that hold the bottom cover of the device in place.

    • Unscrew them and place them on your work surface.

    • Then, un-clip the bottom cover, starting with the side shown in the third picture.

  5. Carefully unplug the MAIN and AUX antennas. Unscrew the fixing screw with the Philips # 0 screwdriver. Then lift the chipset slightly and remove it from the connector.
    • Carefully unplug the MAIN and AUX antennas.

    • Unscrew the fixing screw with the Philips # 0 screwdriver. Then lift the chipset slightly and remove it from the connector.

Conclusion

To reassemble your device, follow the instructions in reverse order.

Special thanks to these translators:

100%

Israel is helping us fix the world! Want to contribute?
Start translating ›

Felice Suglia

Member since: 06/15/2013

14,580 Reputation

150 Guides authored

0 Comments

View Statistics:

Past 24 Hours: 0

Past 7 Days: 0

Past 30 Days: 0

All Time: 74