Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 7 guides that include this step.

English
German

Translating step 4

Step 4
Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard. The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again. The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.
  • Using a pair of blunt tweezers, push on the tabs of the small white connector to separate it from the motherboard.

  • The entire bottom casing should lift with no resistance. If there is too much resistance, verify you removed all the screws, and run the plastic spudger tool around the face-plate again.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.