Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 22 guides that include this step.

English
German

Translating step 4

Step 4
Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case. Lift the display panel from its left edge and rotate it toward the right edge of the iMac.
  • Remove the eight 12 mm T8 Torx screws securing the display panel to the rear case.

  • Lift the display panel from its left edge and rotate it toward the right edge of the iMac.

Entferne die acht 12 mm Torx T8 Schrauben, welche den Bildschirm am hinteren Gehäuse befestigen.

Hebe den Bildschirm von seiner linken Kante her an und drehe ihn in Richtung der rechten Seite des iMac.

Your contributions are licensed under the open source Creative Commons license.