Skip to main content

Notice: You are editing a prerequisite guide. Any changes you make will affect all 5 guides that include this step.

English
Dutch

Translating step 7

Step 7
Continue cutting through the adhesive on the top and right sides of the phone. The proximity sensor, earpiece speaker, and front-facing camera are all located along the top edge of the phone, but are housed beneath the display unit. You shouldn't come into contact with any of them as you insert your pick to cut the adhesive. The proximity sensor, earpiece speaker, and front-facing camera are all located along the top edge of the phone, but are housed beneath the display unit. You shouldn't come into contact with any of them as you insert your pick to cut the adhesive.
  • Continue cutting through the adhesive on the top and right sides of the phone.

  • The proximity sensor, earpiece speaker, and front-facing camera are all located along the top edge of the phone, but are housed beneath the display unit. You shouldn't come into contact with any of them as you insert your pick to cut the adhesive.

Ga door met het doorsnijden van de lijm, deze keer aan de boven- en rechterkant van de telefoon.

De nabijheidssensor, oorstukspeaker en de naar voren gerichte camera bevinden zich allemaal langs de bovenkant van de telefoon, maar liggen onder de schermmodule. Als het goed is, kom je dus niet in contact met deze onderdelen. Als dat wel zo is, weet je dat je plectrum op de verkeerde plek zit.

Your contributions are licensed under the open source Creative Commons license.