DeLonghi ESAM xxxx - (Different Types) Pressure Regulator Installation

Guide Prerequisites

All prerequisite guides must be translated before this translation is considered complete.

DeLonghi ESAM 3000.B Magnifica Open

Guide Information

= Done = Incomplete

      Describe the specific part or component of this device you're working on. Ex: Battery

      Create a title.

      This brief 1-2 sentence summary will appear in search results.

      Communicate background information before the reader dives into the guide.

      Guide Steps

      Step 1

      The old safety valve - seen in the first photo already expanded - is screwed on the pump. It is replaced by a combination of safety valve and pressure balance valve. The diaphragm valve dampens the shocks of the pump, making the flow of water quieter and quieter.

      Step 2

      Remove the two hoses from the valve. For the thicker hose you have to squeeze the hose clamp with pliers, push it away and you can pull off the hose.

      Step 3

      Pull the pump slightly out of the housing in its rubber mount. Place a fork wrench SW 12 on the pump tube.

      Step 4

      Make sure that there is a sealing ring above the thread on the valves, marked yellow in the photo.

      Your contributions are licensed under the open source Creative Commons license.