Skip to main content
English
German

Translating step 1

Step 1
Remove the two 7mm PH #1 screws from the fingerprint scanner mounting tab by rotating the screw driver counter clockwise, removing the screw from the housing completely. Remove the fingerprint scanner assembly from the unit by lifting the scanner up and away from the unit housing. Remove the fingerprint scanner assembly from the unit by lifting the scanner up and away from the unit housing.
  • Remove the two 7mm PH #1 screws from the fingerprint scanner mounting tab by rotating the screw driver counter clockwise, removing the screw from the housing completely.

  • Remove the fingerprint scanner assembly from the unit by lifting the scanner up and away from the unit housing.

Insert translation here

Insert translation here

Your contributions are licensed under the open source Creative Commons license.